A rear wheel drive scooter designed for all terrains, with loop handlebars, thumb and finger operated controls and full suspension. Available in three and four wheeled models. Has a separate charger. Adjustable desk style seat with a headrest and adjustable tiller. A range of accessories is available.
Safety flag; rear basket; cane holder; frame carrier; mirrors; zip bag.
Cruizer 3 Scooter 3 wheeled model
| Specification | Standard |
|---|---|
| Backrest Height | 470 mm |
| Base Height (clearance) | Unknown |
| Length | 1450 mm |
| Load Capacity (supplier stated) | 220 kg |
| Seat Depth | 460 mm |
| Seat Height | Unknown |
| Seat Width | From 470 mm to 510 mm |
| Weight (kg) | Unknown |
| Weight of Heaviest Part | Unknown |
| Width | 655 mm |
A rear wheel drive scooter with front and rear suspension
FRAME
epoxy coated steel frame. The scooter has fibreglass cowling's and slip resistant synthetic matting on the base and the footrests.
Available in a candy red apple colour (4 wheel model) and a champagne colour (3 wheel model).
SEAT
padded vinyl type, optional 510mm seat width
STEERING COLUMN (tiller)
angle is adjustable via a lever on the tiller
FRONT WHEELS
125mm pneumatic tyres
REAR WHEELS
125mm pneumatic tyres
BATTERY CHARGING
is achieved by connecting the scooter from the rear charger inlet via the 24 volt off board charger to a mains power point
BATTERIES
are two 12 volt batteries, that are stored in separate boxes with carry straps under the seat.
FOOTREST
is sloped with slip resistant strips incorporated into the platform. There is sufficient room to place feet either side of the tiller base.
CONTROLS
include loop handle bars for steering and both thumb or finger levers for acceleration and reverse function. There is a speed control dial with fast / slow indicators, illumination display for battery status, key operated on/off control, push button lights and horn and a switch for left / right indicators. Right hand mirror is standard. Left hand rear view mirror is optional.
BRAKES
are regenerative electromagnetic
BASKET
attaches to the front of the tiller
SAFETY FEATURES
emergency brake system, front and rear indicators, rear tail lights, adjustable headlights and reverse warning.
FREE WHEELING
The scooter can be free wheeled by pushing the foot operated lever located on the right hand side of the rear of the scooter.
TRANSPORTING
Seat, battery cover and batteries are removable to assist with transportation.
Overall length..................1450mm
Overall width....................655mm
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
This product has been tested and meets the requirements for the CE mark, for European Standards.
Taiwan