A compact front wheel drive powered wheelchair with a rigid steel frame. It accommodates a choice of three power seating systems. Available power options include: power tilt and recline, power seat elevator and power legrest. It features adjustable suspension. Available with various seat widths.
GENERAL
Battery
Battery charger
Standard accessories
Optional joystick knobs
Positioning belt
Calf support
Alternative drive systems - chin controls, head array, sip & puff system, Mini joystick
Oxygen holder
Crutch holder
Base colour choice
Anti tip wheels
Lights package
CS SEAT
Seatbelt buckle
Seatbelt auto tension
Retractable panel holder
Seat width 450 or 500mm
Driving control Vr2 advanced
Seat tube fixed
Seat elevator
CORPUS SEAT
Removable headrest
Backpack hooks
Arm support - swing away mounting
Footstraps
Table
- side cut out for control panel swing away
- Centre mount of control panel
- Adjustable angle
- Small
Seatbelt buckle
Control box holder - retractable
Thigh support kit - large and X large sizes
Lateral support kit
Push handles
Power options include: power tilt and recline, power seat elevator and power legrest
Drive wheel kit - solid or air filled
Seat size - width 430 or 480mm, depths 360, 410, 460, 510, 560 mm in fabric, leatherette or no pad
Backrest fixed with reclining armrests included with fabric, leatherette or no pad. Heights 535 or 605mm
Backrest shear reduction with reclining armrests included, fabric or leatherette, 605mm height
Armrest kit in fabric, leatherette or no pad. Lengths : 250, 300,350 or 400mm
Driving control panel mount - left or right
Front swing arms with curb climber
Seat tube / seat elevator
Fixed Seat / Seat tilt to 45 degrees
Legrest with two piece footplate
Elevating legrest - manual or power adjustment
Backrest recline - manual or power adjustment
PS SEAT
Table - Small
Seatbelt buckle
Seatbelt auto tension
Control box holder - retractable
Headrest - Ergo or sling back
Thigh support- large
Calf support - medium
Push handles
Electronics - R-net or Vr2 Advanced
Seat size - width 400 or 480mm, depths 410, 435, 460, 485, 510, 535mm in fabric, leatherette or no pad
Backrest with armrest attachment included. Backrest kit - Corpus fabric, Corpus leatherette or sling back fabric. Widths 400 or 480mm
Armrest kit in fabric or leatherette. Lengths : Narrow 263 or 353mm; Corpus 350 or 400mm
Driving control mount - left or right
Seat tube / seat elevator
Fixed Seat / Seat tilt to 45 degrees
Legrest swing out to 70 degrees
Footplate: Max leg narrow (steel), Max leg wide (steel), MPS wide (plastic)
Permobil C300 chassis with a choice of three seat models
. C350 Corpus - with optional powered functions eg. electrically operated seat tilt and seat lift, legrest and backrest adjustments.
. C300 CS (Captain Seat) - a slightly contoured seat with optional powered height adjustment.
. C350 PS - Adjustable seat with a sliding telescopic frame and expanding seat pan. Can be used with electrically operated seat tilt and seat lift.
| Specification | C300 Corpus | C300 CS | C300 PS |
|---|---|---|---|
| Armrest Height (from seat) | From 190 mm to 290 mm | 215 mm | From 215 mm to 340 mm |
| Backrest Height | From 535 mm to 605 mm | 520 mm | From 410 mm to 530 mm (see Additional Dimensions) |
| Load Capacity (supplier stated) | 100 kg | 100 kg | 136 kg |
| Seat Depth | From 360 mm to 560 mm | 430 mm | From 410 mm to 535 mm (see Additional Dimensions) |
| Seat Height | 560 mm | 490 mm | From 510 mm to 710 mm |
| Seat Width | 430 or 480 mm | 450, 500 or 550 mm | 400 or 480 mm |
| Width | 620 mm | 620 mm | From 615 mm to 840 mm |
C300 Corpus
Seat Front Height...........560 - 770 mm with electric seat lift
Backrest Angle..............90 - 165 degrees
Legrest angle...............80 - 150 degrees
Overall Length..............1080 mm
Overall Height..............Unknown
Weight of Heaviest Part.....Unknown
Weight .................... 112 kg
Turning radius..............625 mm
Max speed ................. 7 km/h
Range...................... 30 - 35 km
C300 CS
Seat Front Height...........490 - 690 mm (with electric seat lift)
Backrest Angle..............80 - 150 degrees
Overall Length..............1080 mm
Overall Height..............Unknown
Weight of Heaviest Part.....Unknown
Weight .................... 112 kg
Turning radius..............625 mm
Max speed ................. 7 km/h
Range...................... 30 - 35 km
Obstacle clearance......... 70 mm
C300 PS
Seat Angle..................45 degrees
Backrest Height.............Sling back 410 - 530 mm (Ergo back 600 mm)
Backrest angle - adjustable 85-115
Overall Length...............1143 mm
Overall Height...............1040 mm
Weight of Heaviest Part......Unknown
Weight incl batteries .......129 kg
Turning radius...............625 mm
Max speed .................. 7 km/h
Range....................... 25 km
This wheelchair is the most economical solution in the Permobil range. It is designed for strong outdoor performance despite its small size.
FRAME
Rigid frame
Suspension - adjustable
Front and rear tie down points
Choice of colour
SEAT
Three seat options:
. C300 CS (Captain Seat) - a slightly contoured seat. Several sizes and manually operated reclining are standard. Electric seat lift is optional
. C350 Corpus - Contoured padded seating. Modules allow for changes to be made. Can be fitted with all accessories and additional functions eg electrically operated seat tilt and seat lift, legrest and backrest adjustments.
. C350 PS - Adjustable with a sliding telescopic frame and expanding seat pan. Can be used with electrically operated seat tilt and seat lift.
UPHOLSTERY
Synthetic
BACKREST
C300 CS - manually adjustable angle. Padded, contoured back
C300 Corpus - electrically adjustable angle. Padded, contoured ergonomic back with in built, adjustable lumbar and trunk supports
C300 PS - Sling back adjustable height
HEADREST
C300 Corpus -adjustable in height, depth and angle
Optional on other models
ARMRESTS
C300 CS - manually adjustable angle
C300 Corpus - optional swing away mounting
C350 PS - lift up armrests, fixed or adjustable height
LEGREST
Adjustable height
C300 CS - centre legrest is manually adjustable angle
C300 Corpus - electrically adjustable legrest
C350 PS - swing away legrests
FOOTPLATES
C300 PS - Two piece Hangars swing in / swing away. Angle adjustable
C300 Corpus - two piece footplate
WHEELS
Solid or pneumatic tyres on drive wheels
Front anti tip wheels
REAR CASTORS
Microcellular
CONTROLS
Corpus seat: R-Net electronics with ICS Intellligent control system. Two programmable tilt and power legrest positions.
PS seat and C300CS seat: VR2 electronics
BATTERIES
8 amp battery charger
2 x 60 amp hr battery capacity
MOTOR
Four pole motors 2 x 250 watts
TRANSPORT or DISMANTLING
Wheelchairs do not dismantle
Front and rear tie down points
BRAKES
Automatic
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.
There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with max. length 1250mm, max. width 750mm, max. turning circle1500mm, and max weight 200kg.
For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.
Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.
All wheelchairs require regular maintenance. Refer to User Manual for specific details
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Sweden