Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

Hill-Rom Patient Mate Over Bed Table

Overview

Short Description

This range of mobile overbed tables is height adjustable, operated by a gas spring mechanism, and has storage units adjacent to the upright support. The dual tray top slides towards and away from the person. Most models have a vanity storage unit beneath the tray and a standard or low base. The tables have four castors have four double wheel castors. Four table models are available. Dual access allows access to storage units from either side of the table. Optional food tray.

Models And Options

Models

* C-Base OBT100
* Patient Mate OBT230
* PatientMate Junior OBT220
* Standard OBT210

Dimensions

Specification C-Base Patient Mate Junior Patient Mate Standard Standard
Base Width 790 or 890 mm 790 or 890 mm 790 or 890 mm 790 or 890 mm
Depth 460 mm From 380 mm to 760 mm From 380 mm to 760 mm 380 mm
Height From 720 mm to 1080 mm From 760 mm to 1170 mm 760 mm From 740 mm to 1120 mm
Width 790 mm 910 mm 1120 mm 910 mm

Additional Info

More Details

PatientMate Junior Overbed Table
* Dual surfaces (sliding surface)
* Vanity storage
* Framed mirrors
* Gas lift mechanism
* Padded base
* Standard or low base

PatientMate Overbed Table
* Storage compartment
* Gas lift mechanism
* Dual surfaces
* Large vanity with mirror

Standard Overbed Table
* Standard or low base
* Gas lift mechanism
* Vanity storage and mirror
* Single surface

C Base Overbed Table
* Gas lift mechanism
* Single surface

Base dimensions
Standard base is 75mm (H) x 480mm (W) x 790mm(L)
Low base is 50mm (H) x 480mm (W) x 890mm (L)

Factors To Consider

The design allows articles to all be stored in the same area rather than in bed side tables

Setup And Maintenance

Maintenance

Refer to supplier or manufacturer manual for all safety and maintenance instructions and details.

Requirements

Place Of Manufacture

Hill-Rom (USA)

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Additional Images

Suppliers

Hill-Rom Australia
72-84 Shepherd St
Marrickville
NSW 2204
Sales: 02 9569 0255
Fax: 02 9569 8394
Contact Person: Jeff Kennedy
Website: http://www.hill-rom.com.au
Country Mobility Trends
28 Holland Rd
Polo Flat
Cooma
NSW 2630
Sales: 0457 850 300
Fax: 02 6456 7314
Email: sales@countrymobilitytrends.com.au
Website: http://www.countrymobilitytrends.com.au