A powered, mid wheel drive wheelchair with a rigid steel frame. It is suitable for indoor and outdoor use, including terrain such as sand and snow. The wheelchair is available with several seating systems and is available with power tilt, recline and seat height elevation. A range of accessories are available. It is suitable for a youth or adult and is available in a range of seat sizes.
Positioning Options
* 300mm seat elevation
* 50 weight shift tilt in space
* Power legrests
* Power backrest
* Anti shear backrest
* Headrests
Other Options
* Bumper rails
* Luggage racks
*Alternative controls and mounting systems
* Swing back joystick
* Seat belts
* Flip back armrests
* Tray - clear polycarbonate or wooden
* Rear carry bag
* Heel loops
* Calf straps or pads
* Lateral trunk supports
* Oxygen bottle carrier
* Crutch or walking stick holder
* Stump support
| Specification | Modular | MPS Seat | Standard |
|---|---|---|---|
| Armrest Height (from seat) | Unknown | ||
| Backrest Height | Unknown | ||
| Load Capacity (supplier stated) | 155 or 182 kg (lower weight range is the maximum if the seat elevation is included) | ||
| Seat Depth | From 350 mm to 600 mm Can be customised | From 350 mm to 600 mm Can be customised | |
| Seat Height | From 470 mm to 825 mm (range of the seat elevation if selected) | ||
| Seat Width | From 340 mm to 610 mm | From 410 mm to 610 mm | |
| Width | 710 mm |
Range of Tilt In Space.......... From 0 degr to 50 degr
Height of Seat Front from Ground... 470 mm (fixed height seat)
Height of Seat Rear from Ground.... 425 mm (fixed height seat)
Length Overall................... 1100 mm
Height Overall................... 1040 mm
Weight Overall................... 110 kg
Speed (km/hr)................. From 0 km/h to 10 km/h
Battery Ampage.................40 or 70 Amps
Frame
* This wheelchair features a rigid, epoxy coated, mild steel frame with two mid mounted motors
* All six wheels maintain constant contact with the terrain through the articulated suspension frame
* The drive wheels have independent suspension
* A range of frame colours is available
* Anti-tip wheels are located at the rear
Seat
* The MPS seat is standard. It is a car seat style that incorporates an anti thrust seat front and lateral contouring on the seat and high backrest
* An optional modular seating system is available that can accommodate various seating systems
* A flat board seat with MPS backrest is available for use with a pressure reduction cushion
* The seating can be customised
* Powered tilt in space and powered seat elevation are optional
Upholstery
* The seat has three grades of foam and a rubber sprung pelvic support area
* The seat is padded vinyl and the backrest is fabric covered
Backrest
* The backrest features lateral contouring, lumbar support and manual recline using a small hand wheel located on the right side of the backrest base
* There is a padded, height adjustable headrest
* Powered backrest recline is optional
* A push handle is integrated into the backrest of the chair
* Modular or customised backrests can be added to the frame
Armrest
* The armrests are padded, full length, height and width adjustable and removable as standard
* They can be customised
* They are removable by lifting a small lever at seat height, then lifting them out
* Lift up armrests are optional
Legrests
* A one piece legrest is standard
* Powered elevating legrests are optional
Footplates
* The standard footplate is a single footboard which is height adjustable and lifts up to fold away
* Two piece, height adjustable, lift up footplates are optional
Wheels
* The chair can be fitted with standard or all terrain tyres
* It has alloy wheels with split rims
* On the standard drive wheelchair the drive wheels are 320mm diameter and 55mm wide polyurethane
* When set up for all terrain driving, the drive wheels are 355mm knobby, low pressure, pneumatic tyres
* The standard and all terrain wheels are interchangeable using a jack and unscrewing the wheel nuts
Castors
* The four standard front and rear castors are micro cellular polyurethane or pneumatic 200mm diameter castors
* The castors for all terrain driving are 260mm diameter, 85mm wide black, pneumatic castors with tread
Controls
* A range of controls is available
* The standard chair is fitted with a Dynamic DX joystick controller
* Other options can be fitted to this controller depending on the operators needs, including tray, chin, foot, head and attendant control
Battery
* The battery boxes located under the seat can accommodate multiple sizes of batteries
* A separate charger is used which plugs from the mains power into the end of the joystick control
* Two 40 amp gel cell batteries are fitted as standard
* High Capacity 70 Amp batteries are available on request
Motor
* The motors are mounted across the frame
* It has heavy duty gearboxes, high torque, high power, 4 pole motors providing 900 watts of power
* A single small lever for each motor at the front of the wheelchair engages and disengages motors to allow the wheelchair to be freewheeled
Brakes
* The brakes are electromagnetic
* Additional manual brakes are available
All wheelchairs require regular maintenance. Refer to User Manual for specific details
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
Victoria, Australia