Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

Freerider Luggie Portable Travel Scooter

Overview

Short Description

A lightweight rear wheel drive four wheeled scooter that performs as a three wheeled scooter and that folds compactly for transportation. Suitable for indoor and outdoor use on flat, even, surfaces. It is not suitable for off road or off road like surfaces. A range of accessories is available.

Models And Options

Models

Only one model is available

Options

Accessories
* Battery charger docking station
* Full length armrests
* Soft travel bag
* Hard travel case
* Battery bag
* Battery replacement
* Backpack

Dimensions

Specification Standard
Backrest Height 310 mm
Base Height (clearance) 64 mm
Length 1000 mm
Load Capacity (supplier stated) 114 kg
Seat Depth 365 mm
Seat Height From 500 mm to 550 mm from ground
Seat Width 365 mm
Weight (kg) 25.8 kg
Weight of Heaviest Part 23.4 kg with battery removed
Width 455 mm

Additional Dimensions

Length Folded..... 660 mm
Height Overall.... From 815 mm to 860 mm
Turning Circle.... 900 mm

Additional Info

More Details

Frame
* Powder coated aluminium alloy frame
* Rear anti tip bars with rollers

Tiller
* Tiller is height and angle adjustable
* Tiller can be telescoped down to allow under desk/table access

Seat
* Fixed position moulded ABS plastic seat
* Seat can be positioned at standard height or low height

Backrest
Moulded ABS plastic backrest, folds at seat level for transport

Armrests
Full length armrests are optional

Wheels
* Front are 152mm (6") diameter solid tyres
* Rear are 178mm (7") diameter solid tyres

Controls
* Proportional finger control, right hand forward, left hand reverse
* On/off switch is located on the tiller, underneath the handlebars, and lights up red when switched on. NOTE: This switch should always be in the off position when getting on or off the scooter and when folding the scooter for transport
* Battery indicator

Batteries
* Single sealed lithium battery
* Charging point is located on the footboard under the seat
* Battery can be removed and charged in a separate charger (optional)

Motor
* Direct drive
* 24 volt DC permanent magnet
* Motor disengagement (freewheeling) is via lever at the rear

Transport
* Scooter folds compactly for transport
* Soft travel bag or hard travel case are optional
* Battery can be removed

Colours
Available in red or yellow

Footrest
Footrest has a slip resistant synthetic, textured rubber surface

Brakes
Electronic, regenerative disc brakes

Factors To Consider

This item should be trialled in the users home environment to ensure maximum safety / independence. Environmental considerations include kerbs, footpaths, road / railway crossings, etc

Overall length...........1000 mm
Overall width........... 455 mm
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.

Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.

Accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Setup And Maintenance

Maintenance

All scooters require regular maintenance. Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Requirements

Place Of Manufacture

Taiwan

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.

Additional Images

Suppliers

Scooters Australia Lane Cove
161 Burns Bay Rd
Lane Cove
NSW 2066
Sales: 02 9418 6392
Fax: 02 9418 9386
Contact Person: Phil Dent
Toll Free: 1300 622 633
Email: lanecove@scootersaus.com.au
Website: http://www.scootersaus.com.au
Scooters Australia South Hurstville
789 King Georges Road
South Hurstville
NSW 2221
Sales: 02 9546 6244
Fax: 02 9546 6244
Email: hurstville@scootersaus.com.au
Website: http://www.scootersaus.com.au
Country Mobility Trends
28 Holland Rd
Polo Flat
Cooma
NSW 2630
Sales: 0457 850 300
Fax: 02 6452 5525
Email: sales@countrymobilitytrends.com.au
Website: http://www.countrymobilitytrends.com.au