Lencare New Sliding Grab Rail 32mm
|
Please check the price and availability with the supplier(s)
Short Description
A stainless steel grab rail with a fixed squared off end and a sliding rail bracket. Both ends have covered flanges. The sliding rail bracket has an undersling that allows a full 270 degree hand movement over the rail. It operates with one fixed end and the other end will slide along (through) the length of the rail until the desired fixing point has been located. Once the fixing point has been found, the rail is cut to suit the sliding undersling bracket is secured. Available in two lengths and 32mm diameter.
Additional Info
More Details
Features include
* The sliding rail bracket also has a threaded grub screw locating fixing. An allen key is supplied with the unit
* There is a plastic plug in the end of the tube, this provides a neat and professional finish on the 'cut' end
* Different lengths of 750mm and 1000mm to choose from
* Additional brackets only can be supplied if more fixing points are required
* Available in a brushed stainless steel finish
* Screws provided with the rail
* Length is measured centre to centre
Place Of Manufacture
Unknown
Price Guide
Contact supplier for price
Models And Options
Models
Only one model available
Dimensions
| Specification | Standard |
|---|---|
| Diameter | 32 mm |
| Length | 750 or 1000 mm |
Setup And Maintenance
Installation
* When installing rails, it is important to ensure that the fixtures are designed to withstand the forces applied to them, and that the screws or bolts used will not rust or otherwise deteriorate
* Rail installation in public buildings must comply with the relevant Australian Standards and Building Code of Australia
Requirements
Standards
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au
When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.
Suppliers
Lencare Pty Ltd (Wholesaler only)Centenary Distribution CentreUnit B1, 2-6 Greenhills Ave Moorebank NSW 2170 Australia Sales: 1300 600 600 Fax: 1300 669 121 Contact Person: Alex Ziarkowski Email: sales@lencare.com.au Website: http://www.lencare.com.au |
Disclaimer
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.