Additional Info

More Details

Frame
* The chair is mounted on an epoxy coated tubular steel frame
* The tilt adjustment is gas assisted and is positioned on the push handles at the rear of the chair

Seat
* The air cell support in the seat is adjustable via two squeeze valves located on the left side of the chair

Backrest
* Five layers of varying density foams. In built lumbar support

Armrests
* The swing away, removable armrests enable side transfer into the chair

Upholstery
* Synergy fabric on the front of the seat, back and legrest has four way stretch to minimise shearing forces. It is also fluid and bacteria resistant
* Vinyl fabric on the sides and back of the chair
* The cover attaches to the chair with hook and loop fastenings

Legrest
* The leg rest angle is adjustable with a gas lift lever underneath the chair
* A removable foot support is optional

Castors
* The castors all swivel, one front castor can be used as a steering castor
* Back castors are locking

Sizes
* The chair is available in three standard seat widths and two seat depths. Sizes can be customised

Considerations

All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use, a different product may need to be considered.

Place Of Manufacture

SA Australia (made by Design Innovations)

Price Guide

Contact supplier for price

Models And Options

Models

MeurisClub Chair
* A tilt in space chair without a reclining backrest.

Meuris Recliner models (separate entries)
* Meuris Explorer Club Recliner: Adult sizing with 317.5 mm (12.5") fixed front wheels for indoor and outdoor use. It also has hand brakes and a lever lock option which acts as a park brake.

* Meuris Explorer Recliner Junior: Child sizing with 317.5 mm (12.5") fixed front wheels for indoor and outdoor use. It also has hand brakes and a lever lock option which acts as a park brake.

* Meuris Club Recliner: Adult sizing with four 150mm (6") lockable castor wheels

* Meuris Junior Club Recliner: Child sizing with four 150mm (6") lockable castor wheels

Options

* Headrest
* Seat belt
* Meal tray
* Adjustable height foot plate

Dimensions

Setup And Maintenance

Maintenance

Cleaning
* Clean using neutral soaps, warm water and a soft rag or sponge
* Wipe with fresh water
* Allow to dry thoroughly
* Do not use harsh solvents, detergents or cleansers

Requirements

Standards

Australian standards approved, tested at 150kgs - Vehicle impact tested to Australian standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards

TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.