Short Description
A range of office chairs which incorporate an inflatable lumbar section in the backrest. The chairs can be adjusted for seat height, backrest angle only, or combined back / seat angle and depth of lumbar support. A range of options is available including medium back or high back, fixed or height adjustable armrests or no armrests. Fabric choices are also available.
Options
* Loop arms
* Drafting footring / high gas lift
* Extra long seat
* Extra wide seat 500mm
* Extended back bar
| Specification |
HIGH BACK |
MEDIUM BACK |
| Armrest Height (from seat) |
From 160 mm to 230 mm |
From 160 mm to 230 mm |
| Load Capacity (supplier stated) |
Unknown |
Unknown |
| Seat Depth |
420 mm |
420 mm |
| Seat Height |
Unknown (see additional dimensions) |
Unknown (see additional dimensions) |
| Seat Width |
500 mm |
500 mm |
Additional Dimensions
MEDIUM BACK
Seat Height FRNT 460 - 580 mm
Seat Height BACK 450 - 570 mm
Backrest Height 330 mm
HIGH BACK
Seat Height FRNT 460 - 580 mm
Seat Height BACK 450 - 570 mm
Backrest Height 410 mm
More Details
* Chair complies with Worksafe Australia - evaluation by AFRDI - statistics essential upgrading requirement and desirable ergonomic requirement certificate: 920
* The prices for this range of chairs varies in relation to the options and accessories requested. The lowest price chair in this range has a medium back, no armrests and is covered in polypropylene fabric
Adjustments
* Inflation of lumbar section: the lumbar section inflates by means of an inflator ball which is connected to a short air-line, allowing the user easy access to the inflation mechanism whilst seated
* Backrest: the backrest height is adjusted by unscrewing the knob at the rear of the backrest; the knob should be re-tightened once the required height is obtained. The backrest angle is adjusted via a lever on right side of chair
* Free flow mechanism - back and seat angle adjustment. The chairs can be supplied with either full free flow or free flow backrest only. Full free flow enables both seat and back to tilt whilst free flow backrest allows backrest tilt only; seat stays still. Free flow action is achieved when lever is lifted to its highest position and left up
* Seat: the seat height is adjusted via operation of a lever located at the front of the seat. Seat angle is adjusted via the lever that adjusts the backrest angle
Place Of Manufacture
BACK-RITE (NZ)
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
subscribers 
