A lightweight self propelling folding wheelchair with lift up armrests, swingaway removable legrests, quick release rear axles. Available in 410mm and 460mm seat widths.
* W18 Abbetta lightweight Wheelchair
The Abbetta range also includes the following models:
* W28 Abbetta Deluxe Wheelchair - stainless steel frame (17kg)
* W58 Abbetta Transporter Wheelchair - attendant propelled
* W68 Abbetta Recliner Wheelchair
| Specification | Standard |
|---|---|
| Armrest Height (from seat) | 135 mm |
| Backrest Height | 330 mm |
| Legrest Length | Unknown |
| Load Capacity (supplier stated) | 90 kg |
| Seat Depth | 400 mm |
| Seat Width | From 410 mm to 460 mm |
| Weight (kg) | 14 kg |
Width NSW 705 mm
Length NSW 1050 mm
Height NSW 940 mm
Folded Width 365 mm
Seat Height 500 mm
Diameter-Castors 200 mm
Diameter-Wheels 610 mm
Frame
Powder coated aluminium with a positive lock when chair is unfolded to give added rigidity and minimise seat sag.
Upholstery
Black synthetic
Seat
* Widths: 410 mm and 460 mm
* Depth: Approx 400 mm. The lower edge of the backrest velcroes to the under side of the seat. By loosening the tension of the lower edge of the back rest more space is created between the seat and backrest.
Backrest
Foam padded nylon wraps around the backrest uprights to provide some cushioning. Small rear pocket.
Armrests
Lift up to provide sideways clearance. Do not lift off.
Legrests
Swingaway, removable. Footrests lift up, height adjustable, ABS plastic.
Castors
Spoked with 200 mm pneumatic tyres
Wheels
610 mm pneumatic tyres. Aluminium wheel rims and push rims. Quick release axles. Adjustable axle plate vertically and horizontally.
Brakes
High mounted with push / pull lever action.
Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RTA approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RTA approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats
Taiwan
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).