A battery powered three wheeled scooter for outdoor and limited indoor use. It has rear shock absorbers and large wheels designed for use over rough terrain. The seat is also fitted with a shock absorber. Features a headlight and indicator / hazard lights. Contoured cowling covers the front wheel to give the appearance of a motorbike. Dismantles for transportation.
cover - sun canopy
Only one model is available
| Specification | Standard |
|---|---|
| Backrest Height | Unknown |
| Base Height (clearance) | 125 mm |
| Length | 1448 mm |
| Load Capacity (supplier stated) | 160 kg |
| Seat Depth | Unknown |
| Seat Height | Unknown |
| Seat Width | Unknown |
| Weight (kg) | Unknown |
| Weight of Heaviest Part | Unknown |
| Width | 670 mm |
Turning Radius: 1397mm
Weights:
Total w /out batteries 85kg
With batteries 130kg
Battery weight 2 x 20kg
Climbing Ability:
Maximum slope angle 11.85
Obstacle climbing ability 125mm
It has front and rear shock absorbers and large wheels designed for use over rough terrain. The seat, which swivels and locks at 45 and 90 degrees, is also fitted with a shock absorber. Also has a rear vision mirror and mud flaps.
TRANSPORTING handles, seat and front wheel are removable for transport
FREEWHEELING switch on handle controls
BATTERY CHARGING is achieved by connecting the charger provided to a mains power point and plugging it into the scooter at the marked charging terminal on the tiller. Charger: 24 VDC, Max 10A
BATTERIES 2 x 12v 40 amp/hr (can take up to 70 amp/hr)
REAR WHEELS 250mm diameter pneumatic.
FRONT WHEEL 250mm diameter pneumatic.
FOOTSPACE on flat platform
SEAT is a solid padded with lift up arms and an adjustable backrest. Operating lever for seat swivel may be situated under the left or right hand side of the seat. Seat slides backwards and forwards. Can be adjusted in height.
CONTROLS can be programmed to increase / limit speed
Speed switch, battery charge indicator, horn (right and left side), indicator switch, speed switch - two forward speeds; one reverse speed
Hand brake on left side (pull towards user to operate)
Accelerator handle on right side (pull towards user to increase speed, release to slow down (automatic stop)
LIGHTS powerful headlight
BRAKES Electromagnetic Automatically engage when throttle is release. Brake lights.
BASKET attaches to the front of the tiller
This item should be trialled in the users home environment to ensure maximum safety / independence. Environmental considerations include kerbs, footpaths, road / railway crossings, etc
Overall length...........1448mm
Overall width............670mm
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Refer to supplier / manufacturer manual for maintenance details and safety warnings.
Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Afikim Electric Mobilisers (Israel)