A battery powered three wheeled scooter with finger operated controls. and the scooter is available with or without armrests. It comes standard with armrests, batteries, bright headlight and tail lights, can holder and rear wire basket. The scooter can be folded or dismantled into two parts plus batteries for transportation.
Caddy with 2 x 12 amp/hr batteries
Caddy with 2 x 17 amp/hr batteries (extended travelling range)
2 x 17 amp/hr batteries (extended travelling range)
solid tyres
| Specification | Standard |
|---|---|
| Backrest Height | Unknown |
| Base Height (clearance) | 90 mm |
| Length | 1100 mm |
| Load Capacity (supplier stated) | 100 kg |
| Seat Depth | Unknown |
| Seat Height | Unknown |
| Seat Width | 460 mm |
| Weight (kg) | 22 kg Without batteries |
| Weight of Heaviest Part | 13 kg |
| Width | 610 mm |
Frame: Sturdy aluminium alloy construction
Seat: The backrest and seat are padded vinyl
Armrests: lift up
Tiller: adjustable front steering column
Platform: The foot platform is flat and covered with slip resistant material.
Wheels: pneumatic tyres (solid tyres are optional)
Brakes: Automatic braking system - electromagnetic operation
Batteries: 2 x 12 Volt 12 Ah (or 2 x 12 Volt 17 Ah. optional). Two removable 12 v batteries are situated under the seat. Separate battery charger - plugs into standard domestic 10 amp outlet.
Controls: 2 forward speeds; 2 reverse speeds, battery LED indicator
Dismantling: Can be folded and stored vertically or dismantled for transportation. Unplug batteries, fold the seat down, lift off front wheel tiller section and if required, remove the rear wheels.
Rear wire basket: clips on behind seat and has 10kg capacity
This item should be trialled in the users home environment to ensure maximum safety / independence. Environmental considerations include kerbs, footpaths, road / railway crossings, etc
Overall length............1100mm
Overall width.............610mm
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.
Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.
Accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.
Refer to supplier / manufacturer manual for maintenance details and safety warnings.
Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Afikim Electric Mobilizers (Israel)