A mid wheel drive battery powered wheelchair. It features a solid padded seat and backrest with a lap belt. Suitable for indoor and outdoor use. Available in one size only.
seat with headrest
CTM HS-2800
A mid wheel drive power chair, with a dynamic control system and left or right handed control.
Seat has a back rest adjustment that can be operated by the user in the chair.
Available with seat with headrest
| Specification | Standard |
|---|---|
| Armrest Height (from seat) | Unknown |
| Backrest Height | 430 mm |
| Load Capacity (supplier stated) | 115 kg |
| Seat Depth | 490 mm |
| Seat Height | Unknown |
| Seat Width | 490 mm |
| Width | 645 mm |
Length 1020mm
Height 900mm
Seat Front Height 580mm
Weight 85kg
Wt heaviest part 39kg
Front wheel diameter 150mm
Mid wheel diameter 260mm
Rear wheel diameter 200mm
Range Max 40km
Speed Maximum 6.5km/hr
Frame: Rigid frame with plastic cog cover over motors and batteries. The cover is available in three colours, red, green or silver.
Upholstery: Contoured, padded vinyl (synthetic) seat and backrest
Backrest: The backrest on the seat is able to recline via a lever on the side. The headrest is height adjustable.
Seating foam padded solid seat, removable
Backrest Folding
Armrests: lift up, angle and width adjustable
Controls: The Dynamic DL joystick controller is mounted on a bracket allowing for depth adjustment, and it features a speed dial, battery indicator, speed dial, tremor dampener and horn.
Footplate: single, lift up, height and angle adjustable, steel
Front wheels:
Mid wheels: pneumatic
Rear wheels:
Anti tip wheels: at rear
Freewheeling: The free wheel mechanism has an extended lever located on the side of the wheelchair.
Motors: 2 pole DC brushes
Brakes: automatic
Transporting: Unplug controller and power plug. Seat can be lifted off base. Batteries are removable.
Battery Charging: charger is in built. Charging point is behind seat.
Batteries: 2 x 12 v sealed lead acid batteries, are stored under seat
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.
There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with max. length 1250mm, max. width 750mm, max. turning circle1500mm, and max weight 200kg.
For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.
Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.
Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Chien Ti Mobility (Taiwan)