If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.
Lift Shop Roll Wheelchair Platform Stairlift
Overview
Short Description
A battery operated wheelchair platform lift allowing straight or curved run access from one level to another travelling at the same gradient and location as existing stairs or ramps. Suitable for up to five metres of travel and indoor and outdoor use. The track is floor mounted directly to the stairs. Options are available. Can be customised.
Models And Options
Options
Tracking type: curved straight or both
Models
One model available with option for either indoor or outdoor use
Additional Info
More Details
OPERATION
battery operated - electrically charged mechanical friction rack and pinion drive type
METHOD OF LIFT OPERATION
constant pressure control buttons or remote control
TRACK MOUNTING
attached directly to the stair treads
POSITION OF SWITCH
control unit on flexible cord as well as two remote control units
ARMRESTS
lift up
FOOTREST
slip resistant covering
SEAT
standing or wheelchair access
SAFETY FEATURES
safety ramps, speed governor
APPLICATION
indoors / outdoors for straight run and turning stairs or ramps
Setup And Maintenance
Installation
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Requirements
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
The supplier states that this lift is fully compliant with AS 1735 Part 7
Place Of Manufacture
Italy
Suppliers
Lift Shop Pty Ltd
Unit 1 / 75 Cornish CircleEastgardens
NSW 2036
Sales: 02 9666 3939
Fax: 02 9666 3949
Contact Person: Les Katz
Email: les@liftshop.com.au
Website: http://www.liftshop.com.au