Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

Mangar Bathing Cushion

Overview

Short Description

A powered (mains or battery) inflatable bath hoist, which is positioned within the bath. It allows the occupant to lower themselves from the top of the bath into the bath water via a hand held controller. This hoist raises the user up to 400mm. It can be folded and is portable. Suitable for domestic use. A model that lifts up to 500mm is available as a special order.

Models And Options

Models

* Mangar Bathing Cushion 400 (max. seat height 400mm)
* Mangar Bathing Cushion 500 (max. seat height 500mm)

Options

Carry bag

Dimensions

Specification Standard
Boom Length N/A
Boom Rotation N/A
Load Capacity (supplier stated) 150 kg
Seat Depth 440 mm
Seat Height From 20 mm to 400 mm (from deflated to inflated)
Seat Width 580 mm

Additional Dimensions

Backrest width 540 mm
Backrest depth 330 mm
Airhose length 1.8 m
Weight of Cushion 2 kg

Additional Info

More Details

. The Comfort Bather has four suction cap feet on the base to attach it to the surface of the bath.
. It fits standard bathtubs with a width of 585mm
. It operates with low air pressure and fully inflates in about 3 minutes. It deflates gently with weight on it. It will lose air slowly if left to deflate after use.
. Hoist has lumbar support which can fold flat to allow complete submersion in the water
. The air compressor will not allow the unit to be deflated unless there is enough charge for it to be inflated again (preventing the user from being stuck in the tub unexpectedly).
. The air compressor will inflate the unit up to 3 times on one charge

Factors To Consider

. The Comfort Bather Bath Lift is best suited for someone with reasonable upper body stability
. Most Mangar inflatable bathers raise the user to a height of 400mm. This product is available for people who have a higher bath and / or need to raise to a height of 500mm

Requirements

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

Place Of Manufacture

United Kingdom

Suppliers

Active Mobility Systems
30 James St
Lidcombe
NSW 2141
Sales: 02 9649 1575
Fax: 02 9649 8506
Contact Person: Stephen Pridham / Mark Roach
Toll Free: 1800 543 837
Email: sales@activemobility.com.au
Website: http://www.activemobility.com.au
Active Medical Supplies (importer)
35 Southgate Ave
Southgate Corporate Park
Cannon Hill
QLD 4170
Sales: 1800 267 267
Fax: 07 3899 8825
Email: enquiries@activemedicalsupplies.com.au
Website: http://www.activemedicalsupplies.com.au
Lightning Mobility
9 Aurora Ave
Queanbeyan
NSW 2620
Sales: 02 6297 6672
Fax: 02 6297 6872
Contact Person: Rod Aussel
Email: info@lightningmobility.com.au
Website: http://www.lightningmobility.com.au
Linds Rehabilitation Equipment
58 ? 60 Star Cres
Hallam
VIC 3803
Sales: 03 9796 3399
Fax: 03 9796 3313
Email: sales@lindsrehab.com.au
Website: http:///www.lindsrehab.com.au
Highgate Healthcare (importer)
376-380 South Rd
Richmond
SA 5033
Sales: 08 8234 0100
Fax: 1300 350 360
Contact Person: Mark Joyce
Toll Free: 1300 350 350
Email: sales@highgatehealthcare.com.au
Website: http://www.highgatehealthcare.com.au
Advanced Lifecare
355 Wellington St
Launceston
TAS 7250
Sales: 03 6343 4825
Email: sales@advancedlifecare.com.au