A high end Static 'True Low Air Loss' (TLAL) powered pressure air mattress replacement system which provides body tissue pressure redistribution and skin moisture management for pressure ulcer therapy. Recommended for anyone at medium to high risk of developing pressure sores and if non tolerant of alternating air mattress devices. Removable clinical top cover is moisture resistant and breathable.
Available in Bariatric widths: 990mm,1070mm,1220mm,1370mm, and 1530mm wide
| Specification | Mattress |
|---|---|
| Height | 200 mm |
| Length | 2000 mm |
| Load Capacity (supplier stated) | From 30 kg to 400 kg |
| Weight (kg) | 12 kg for 900mm width model |
| Width | 900, 1070, 1220, 1370 or 1530 mm |
Compressor
Weight (kg) NSW................................... 4.6 kg
Length NSW........................................ 170 mm
Height NSW........................................ 360 mm
Width NSW......................................... 300 mm
. Suitable for hospital, nursing home, rehabilitation and private home community use
. Clinically Pressure mapped. Literature available on request.
Structure
. Replaceable air cells
. Heavy duty replaceable non. kink air tubing and power unit parts
. Directional snaps. Better edge air cell stability
. Integrated convoluted foam base protection incase of power outage
. True Low Air Loss pressure redistribution and skin moisture transference
. Sound damping foam insert for total silent running
. Quick release CPR coupling in the event of an emergency
. High weight capacity for bariatric patients up to 400kg
. Available for bariatric patient use with a simple press of a button
Attachment
Mattress:
. Secures firmly to any profiling or non profiling bed frame with adjustable nylon straps on all corner points.
Power unit:
, Secures with two hangers safely over the bed footboard
Power control unit
. Powerful microprocessor driven touch panel two stage blower style control unit
. Supreme patient comfort selection modes
. Quick inflation mode
. Maximum inflation setting
. Child lock mode feature
. Heavy duty fire retardant power unit casing
. Electric 220/230V
. Attaches to mattress with umbilical cords
. On / off switch, pressure/comfort setting gets adjusted to the user weight
. Illuminated display status, audible and visual alarm, user guide supplied.
. User friendly touch operating mode
Cover
. Removable for laundering and fitted to under mattress
. Washable, moisture resistant, vapor permeable and easy to slide
patient up and down the mattress on the smooth top cover surface finish reducing shear and friction.
Customised features
. Can be customised to fit any non single beds e.g. King, King single, Queen, etc.
Partners can still sleep comfortable beside one another
Safety features
. WARNING SIGNALS: Power failure, CPR deflate
. Easily accessible CPR Emergency mechanism (Mattress deflates under 10 seconds)
Cleaning requirements
Mattress, power control unit and power lead
Using a sponge with hot water at 60 degrees C and with a 10:1 mixture of sodium hypochlorite/detergent (bleach) clean the product in order; removing excess cleaning liquid after each step.
. Umbilical cord moving towards the mattress;
. The underside of the mattress
. Sides and under flaps;
. Mattress top surface
. Front, rear, top, bottom and side panels of motor including power lead
. Dry thoroughly using single use clean paper towels
(Please refer to product user manual for machine washing instructions)
- Filter is easily removed for maintenance.
Maintenance . 12 monthly service is recommended to get the full life span of the product. This can be arranged thru Pegasus Healthcare. Avoid dropping the power unit or accidental piercing e.g. needles, exposed springs from bed fame or cigarette burns. Motor, and mattress can be repaired as necessary.
1. All pressure reduction products must be monitored to prevent any 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony prominences are pressed against the surface below the mattress or seating cushion. Where bottoming out occurs even with correct use (e.g. correct inflation levels), a different product may need to be used. User weights can change over time and the weight limit including linen on bed ,etc should not exceed the recommended product safe working load limit.
2. If non.blanchable erytheme (redness) is observed either reposition the patient more frequently or upgrade to a higher level support surface.
3. The mattress can be punctured.
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp
. Mattress and power unit meets all International, Australian and TGA standards (supplier stated)
Taiwan