Overview

Short Description

A lightweight free standing microfibre mop and bucket combination that can be used for both wet mopping and dry dusting of floors. This unique system combines a mop head that has 360 degree rotation and the ability to pivot 180 degrees and a bucket with an inbuilt spinning basket designed to remove excess water enabling the user to determine the wetness of the mop head.

Method Of Use

Assembling the Mop Head
Screw the pieces of the mop handle together and then snap the mop head dish to the mop head using your foot

Adjusting the angle
The Mop Handle can be adjusted through 180 degrees

Maximum water level
Be sure not to overfill the bucket past the level indicated. Overfilling will lead to water spraying out of the bucket

Rinsing the Mop Head
Rinse the mop head by lifting it up and down in the mop bucket. Then place the mop head in the Spinner.

Drying the Mop Head
Make sure that all of the threads are in the spinner and the mop handle is pointed directly vertical. (Do not slant mop). Then press the mop firmly down to ensure it is snuggly inside the spinner

Dryness Control
Using one foot press on the pedal while keeping one hand firmly around the handle. On average 6 presses will clean and dry the mop. The more you press the drier the mop head will be

Removing Mop Head
Step on the mop head near the edge of the mop head dish with the screw pointing towards your foot. Push the handle away from your body. This separates the mop head dish from the mop head

Washing Mop Head
Place mop head in a hot water machine (60 Degrees) then air dry. Do not wash with Fabric Softener or Bleach. Mop head can be washed up to 100 times