Return to product page

If your browser's Print dialog does not automatically appear, go to the File menu and select Print to print this product.

Days Healthcare Stella Two Motor Riser Recliner

Stella Chair

Overview

Short Description

An electrically operated, fully upholstered lounge chair with dual motors. It has a reclining backrest, elevating legrest and stand up function. The backrest reclines to the horizontal position. The chair is available in leather or macro suede.

Models And Options

Models

There are four other models of recliners available from Days. Each model has a single motor and early rise footrest so that the user can raise the legs without reclining the backrest.

* Serena 4 Button backrest - 160kg load capacity
* Serena Contemporary - 160kg load capacity
* Sofia - single motor, smaller design for smaller users, 115kg load capacity
* Sabelle - 160kg load capacity

Dimensions

Specification Standard
Armrest Height (from seat) Unknown
Backrest Height Unknown
Backrest Recline Angle Unknown
Load Capacity (supplier stated) 160 kg
Seat Depth 500 mm
Seat Height 470 mm
Seat Width 530 mm

Additional Dimensions

Overall Width........ 950 mm
Overall Depth........ 900 or 1720 mm
Overall Height....... 1200 mm

Additional Info

More Details

Frame
Epoxy coated steel and wooden frame with swivel castors

Upholstery
* The chair is fully upholstered with two side pockets
* Available in leather ( colours Navy and Chocolate ) and macro suede fabric (colours Forest and Mudbrick )

Seat
Foam padded.

Backrest
Two section foam padded backrest offering lumbar support and a head rest

Armrests
Full length, padded and upholstered

Legrest
* Legrest is incorporated in the chair with a chaise, and extends from the edge of the seat when in the raised position
* The legrest elevates to a position just below the level to the seat

Controls
* Push button operation on a hand held control
* Hand control is attached to the chair with an extendable cord, and can be located on the left or right side of the chair

Action of the Chair
* The legrest and backrest positions can be adjusted together or independently
* The backrest can be in the upright position with the legrest raised
* The backrest and legrest both adjust to a near horizontal position, allowing the chair to be used as a bed
* The standing function is a combination of a lift up and tilt forwards movement

Power
* Mains powered with battery backup. In case of power failure, two 9v batteries will power the chair to allow the user to get out of the chair
* The batteries can be used once only, and then must be replaced

Requirements

Place Of Manufacture

Days Medical, Asia

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Suppliers

Ausmedic Mobility and Rehab
4 / 37 Leighton Place
Hornsby
NSW 2077
Sales: 1800 245 169
Fax: 02 9477 3522
Contact Person: Peter McLean
Email: sales@ausmedic.com
Website: http://www.ausmedic.com
J B Medical Equipment Pty Ltd
Unit 2 / 25 - 27 Whyalla Place
Prestons
NSW 2170
Sales: 02 8783 5511
Fax: 02 8783 5522
Mobility 2 You
14c Karalta Road
Erina
NSW 2250
Sales: 02 4367 5751
Website: http://www.mobility2you.com.au
Hunter Mobility
395 High Street
Maitland
NSW 2320
Sales: 02 4933 9993
Fax: 02 4933 3727
Email: service@huntermobility.com.au
Website: http://www.huntermobility.com.au