Short Description

The Arjo Miranti trolley has been designed for lifting, transporting and
bathing. It features a height adjustable stretcher with an adjustable
backrest, thigh support cushion, security grip and side guard as well as operating controls on the pillar and hand set. With the power drive
mechanism the trolley is steered but not pushed. Handgrips on the
head end and on the pillar facilitate manoeuvring. The brakes and on board weighing scale are battery powered.

Additional Dimensions

Width..................................... 940 mm
Length.................................... 1950 mm
Lifting Range..................................... From 410 mm to 995 mm

More Details

. One single attendant can care for the user during the entire bathing cycle. The person is collected directly from the bed and transported to the bath and back again without any manual lifting.
. The Miranti integrates with Arjo baths 1900mm and over.
. Lifting and lowering of stretcher, backrest and brakes are operated from a handset.
. Height adjustment and brakes can also be controlled via a press button panel on the pillar.
. The power drive system is operated from a press button in the driving
handles.
. Lifting range dimension refers to height under stretcher.
. Either end of the stretcher can be used as the head end.
POWER DRIVE:
Consists of a fifth wheel which assists the attendant when driving the trolley forward, controlled via a push button in the driving handle.
POWERED BACKREST:
Controlled via the handset and raised/lowered from the side pillar winch.
HANDSET:
Moving the lift up and down and controlling the brakes can be done from the handset which is connected to the lift with a spiral cable.
LIFT FUNCTION:
The lifting / lowering movement is achieved using an actuator driven by a 24V DC motor.
POWER SUPPLY:
24V 4 amp/hr battery. The lift can complete approximately 12 bathing cycles.
(75kg person) with a fully charged battery before it needs recharging.
Low battery level is indicated with a yellow LED. 24V specially designed charger.
CENTRAL BRAKING:
The brakes are placed at 2 points under the chassis. These can be operated both from the handset and the manoeuvring handle. They are manoeuvred by a 24V DC motor.
SCALE:
The power supply for the scale is four R6 batteries.
APPLICATION: May be suitable for bariatric use up to the specified load capacity

Place Of Manufacture

ARJO HOSPITAL EQUIPT (SWEDEN)

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation