Short Description
This hydraulically powered pool lifter, is fully attendant operated. It assists in transferring a person into an in ground pool. The lifter can be used in conjunction with an Oxford sling. It may be suitable for bariatric use up to the specified load capacity. It is suitable for use with a domestic pool.
Options
* Surface mount socket where there is adequate mounting strength.
* Has option of an extension arm that increases the horizontal reach by 510mm.
Models
Hoyer Classic Pool Lift SS-HSP-1 (Sunrise Medical web site)
| Specification |
Standard |
| Boom Rotation |
Unknown |
| Load Capacity (supplier stated) |
182 kg hoist (175 kg sling) |
| Seat Depth |
Unknown |
| Seat Width |
Unknown |
| Spreader Bar Height |
Unknown |
Additional Dimensions
Weight NSW........................................ 30 kg
Lifting Range..................................... 1580 mm
More Details
* The hoist consists of a mast and a lifting boom with a spreader bar at the end with two attachment points for the sling.
* Swivels through 360 degrees
Materials
* Made from steel, with stainless steel painted finish, designed to resist the
humid and corrosive swimming pool environment.
Controls
* These consist of a pump handle found on the mast to raise the hoist, and a screw knob located on the hydraulic cylinder which is released to lower the hoist. Pivoting the hoist is performed manually by the attendant.
Installation
* The hoist is mounted in a socket that requires a 150mm diameter hole to be drilled 200mm into the deck. A sleeve with a nylon bearing is then cemented into the hole.
* The hoist can be removed from the socket when not in use and can also be used in other places by installing additional sockets.
* No under water installation
* A surface mount socket is also available for use where there is adequate mounting strength. This is bolted onto the ground.
subscribers 
