Short Description
A compact residential lift with a hydraulic drive system, smooth and quiet stops and starts and emergency battery powered lowering. Maximum travel distance is 15 metres with a maximum of 7 stops.
If this lift is to be used in a public building it must comply with the relevant Australian Standard. Contact the supplier for details.
Options
. Horizontally collapsible, Woodfold or Visifold car gates
. Automatic operation
. Telephone box and telephone
. Variety of hall station types
. Custom cab sizes
. Plastic, oak laminate and Plexiglass panels
. Customwood cab interiors
. Variety of lock types
. Swing door packages
Models
. Various models and sizes are available with door widths 736 mm to 864 mm.
More Details
STANDARD INFINITY FEATURES:
. Optical scanner floor selector control
. Slack / broken cable safety device
. Anti-creep releveling device
. Emergency lowering valve at pump unit
. Emergency battery lowering with automatic recharging system
. Emergency automatic lighting in event of power failure
. Emergency stop / alarm button in car
. Downspeed limit flow control valve
. Emergency stop button in pit
. Pre-assembled base, rail and bracket assemblies
. Compact hydraulic pump unit
STANDARD CAB FEATURES:
. Brass control panel
. Oak tongue and groove strip flooring
. Oak handrail
. Wide selection of standard melamine for cab walls
. Black anodized aluminium trim
. Digital floor indicator in car
. Solid ceiling with two pot lights
. "Car In Use" illuminated hall buttons
. Automatically timed car lighting
LIFT SPECIFICATIONS:
. Power 220 volt, single phase, 30 amp
. Drive System 1 to 2 cable hydraulic
. Rated Load Capacity 340 kgs
. Rated Speed 180 m/s
. Maximum Travel 15 m
. Number of Stops 7 maximum
. Control System Constant Pressure (Automatic Optional)
. Pit Depth Required 152 mm
. Overhead Clearance Required 2343 mm
Installation
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is recommended that the lift be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit Tel: 02 9370 5221. If outside the Sydney metropolitan area, phone the WorkCover NSW Client Contact Centre on 13 10 50 or the nearest WorkCover Regional Office.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Place Of Manufacture
CONCORD (USA)
Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).