Short Description

A mains powered vertical lifting platform that transports a person, in a wheelchair or standing, between levels up to one metre. The platform has two rails, a safety edge, ramp and operates on a hydraulic cylinder. Indoor and outdoor applications. Australian Standard. Contact the supplier for details.

More Details

. Controls are located on the tower
. Battery back up provides normal operation in the event of a power failure.

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is compulsory that the lift be inspected annually by a competent person. WorkCover requires payment for registration.

Request further details from the supplier or contact WorkCover Plant Registration Unit Tel: 02 9370 5221. If outside the Sydney metropolitan area, phone the WorkCover NSW Client Contact Centre on 13 10 50 or the nearest WorkCover Regional Office.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Place Of Manufacture

Homelift Pty Ltd (NSW)
Australia

Standards

For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).