Short Description
B&D Controll-A-Gate is an automatic gate opener which operates by pressing a remote control transmitter as the gates are approached. It features an automatic close and lock function as well as an in built safety reverse system. The transmitter can also be coded to operate a B&D Automatic Garage Door opener.
More Details
Features & Benefits
* Soft Start / Soft Finish - protects the hinges and gate from excessive wear. Increases the life of the gates and opener
* Automatic close function - in built into the system. The gates can be automatically closed up to 180 seconds after opening. The gate is positively locked when closed
* Powerful Low Voltage - 12V supply for your added safety
* Swing Motor suitable for 3 metre wide opening - or 6 metres for 2 gates
* Slide motor suitable for 6 metre wide gates - or 12 metres for 2 gates
* Simple Disengagement - easy key disengagement of slide motor
* Allen key disengagement of Swing Actuators
* Electro Magnetic Compliance (EMC) Compliant
* Collision Sensing - gate stops and reverses if it comes in contact with an obstruction whilst closing and stops when opening
* Pedestrian Opening - for added protection. The gates will open just enough for a pedestrian to enter the property
* Automatic Reset - after a black out or power surge. No need to reset the limits or transmitter
* A private security code can be preset with one of 3 billion, 486 million available codes
B&D Controll-A-Gate Accessories:
NB. All components of B&D Controll-A-Gate are sold separately to allow you to select the best package for your individual requirements.
Remote Control Transmitters - available in 2 and 3 channel models, the B&D remote control transmitter is suitable for the convenient operation of multiple gates and garage doors.
Keyring Transmitters - small enough to fit onto a keyring. Suitable for pedestrian access.
Entry Keypad - No wiring required. Just attach to the brickwork on front of the garage or gate and enter your own private 4 digit pin number for access.
Warning Light - Provides added safety by lighting while the gate is in motion.
Magnetic Lock - Provides additional security.
Back up battery - Allows operation of the gates during a power failure. Recommended if the gates are the only means of access to your property.
Solar panel - Keeps battery backup charged when mains power is unavailable.
Keyswitch - Enables entry from the outside of the gates with a key. Ideal for kids coming home from school!
Transmitter Wall Button - Ideal for mounting inside the house to automatically open the gates. No wiring required. Can be used up to 20 metres from gate (range dependent upon site conditions)
Safety Infra-Red Beams - Provide added safety and security. If beams are obstructed while gates are closing the gates will automatically stop.
Place Of Manufacture
Australia - electronics are all designed, developed and manufactured in Australia
Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).