Short Description

A range of brass lever taps in three lever lengths. Taps are available in pairs with red and blue (hot and cold) indicators. They are suitable for mains pressure installation only. They can be fitted with standard jumper or ceramic disc valves and have a selection of brassware outlets. They are vandal resistant and suitable for heavy duty commercial use.

Options

. Warm / cold sets with yellow and blue, available as a special manufacturing order
. Three quarter turn on handle
. Jumper valve available on some handle options

Models

Selection of brassware, outlets, handles, levers and adaptors for different kit combinations.
Available as:
Lever Sub Assemblies
Pillar Tap with levers
Wall Top Assemblies
Bib / Pillar Top Assemblies
Basin Top Assemblies

Above come with quarter turn ceramic disc cartridges

More Details

Types of tap operating mechanism:
Levers are solid and curved. Available in three lengths
Pair of levers with red and blue, hot and cold indicators
Application: basin, sink, washing machine, cistern
Mounting options: wall, bench
Operation: rate of water flow is adjusted by horizontal movement of the lever
Temperature: Hot water temperature should not exceed 80 degrees C at the valve outlet. Ceramic disc cartridges are rated at 80 degrees C continuous maximum temperature.
Pressures: Hot and cold water pressures should be equal.
Finishes and colours: chromed, red and blue indicator buttons

Installation

Must be installed by a licensed plumber.
In public buildings, taps should be installed by a licensed plumber to comply with AS 1428

Standards

For some types of equipment, specific Australian or other Standard(s) are
applicable to the materials used in, the manufacturing processes applied
to and the installation of products. Compliance with relevant Standards is
indicated by written certification that a product has been tested and
assessed as compliant with specified Standards. Purchasers are
advised to check with the supplier or manufacturer of this item as to its
compliance with relevant Standard(s).

Place Of Manufacture

Australia