Short Description
A battery operated Power Pak fitted to a manual wheelchair. It enables an attendant to guide the wheelchair without the need for pushing or pulling. The Power Pak is a fixture on the chair so chair cannot be folded.
Available as two Power Pak models for handling loads of approximately 100kg or 125kg. The wheelchair has a 480mm seat width.
Models
Rolleee Junior provides variable forward speed control for different conditions, such as hills. Speed is fixed in reverse. The Power Pak is equipped with manually operated brakes.
Rolleee Senior has all the Junior features except that the Power Pak is highly modified with automatic braking, constant speed (whether up or down slopes), microprocessor programmable controlled circuitry, powerful 200watt 24volt motor . It also has Positive Traction Control to provide adequate contact with the ground at all times for safe operation.
More Details
*Is suitable for a carer requiring assistance pushing a manual wheelchair
*Power Pak unit is located under the wheelchair seat at the rear. It is connected by a cord to the Attendant Control which is mounted beside the right hand push handle.
*Key lock for safety and security
*Power supply: single rechargeable sealed battery. Charger included
*Maximum speed 6 km/hr
*Range is 7-10km (depending on terrain and weight of the individual)
*Handles 1:5 gradient with 100kg load
*Can be adapted to existing equipment at a nominal charge
Wheelchair
460mm seat width. Folding frame with double cross brace. Swing away legrests, removable armrests.
Designed to meet Occupational Health and Safety requirements where a "No Push Policy" is in place.
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Place Of Manufacture
Lockwood Electric Mobility (Vic) Australia