Short Description
A battery powered mid wheel drive wheelchair with a small turning radius. Charger is in built. Features a reclining backrest and an adjustable height headrest. Suitable for indoor and outdoor use. Load capacity 113kg. Maximum speed 6km/hr.
Options
General Options:
- Hercules Scooter / Jazzy Lift
- Crutch stick holder
- Walking frame holder
- Cup holder
- Oxygen bottle carrier
- Rear basket
- Rear view mirror
- Power seat assembly
- Tail light (factory fitted)
- Positioning belt
- Swing away joystick bracket
- Elevating legrests
Seating Options:
- Medium back or deluxe high back seat
- Solid seat pan
- Power seat
- Reclining seat
- Specialty seating (adjustable seat width)
- Versa Seat: adjustable in height, width, depth and angle. It interfaces with all types of seat and back cushions
Models
The Jet 3 model is slightly smaller and less powerful than the Jet 1 model.
Other models are available.
| Specification |
Standard |
| Armrest Height (from seat) |
Unknown |
| Backrest Height |
490 mm |
| Load Capacity (supplier stated) |
113 kg |
| Seat Depth |
460 mm |
| Seat Height |
500 mm |
| Seat Width |
450 mm |
| Width |
585 mm |
Additional Dimensions
Overall Length 860 mm
Overall Height (w /out headrest)920 mm
Backrest Angle 30 degr, up to
Wheel Diameter (Mid) 250 mm
Castor Diameter 200 mm rear
Weight of Heaviest Part 32 kg, Base
Overall Weight 45 kg
Speed up to 6 km/h
Range 40 km, varies with user weight.
More Details
The wheelchair features interchangeable seating systems and programmable electronics.
The seating system can be adjusted in relation to the power base to change the centre of gravity and eliminate a pitching forward effect (if any). Low centre of gravity design provides a smooth stable ride.
MATERIALS ABS plastic shroud.
UPHOLSTERY Vinyl on seat, back and armrests.
SEAT Removable lift off. Grey vinyl contoured medium back with semi recline hinge (lever operation from right side of rear of seat). Adjustable height headrest.
FOOTREST One piece, angle and height adjustable. Optional two piece swing away.
BRAKES Electronic. Regenerative. Disc Park Brake.
BATTERIES 2 X 12 volt, 36-50 amp / hr. Gel or lead acid.
BATTERY CHARGER In built.
TYRES Pneumatic drive wheels.
REAR CASTORS Pneumatic.
ANTI TIP WHEELS Solid rubber.
FREEWHEELING Turn chrome handles under seat.
DISMANTLING Seat is removable.
CONTROL FEATURES Battery level / self diagnostics display. ON / OFF button. Horn.
COLOURS : Jet Red and Electric Blue.
Factors To Consider
The space allowed on public transport for carrying mobility equipment is an area of 1300mm x 800mm.
Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.
There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with max. length 1250mm, max. width 750mm, max. turning circle1500mm, and max weight 200kg.
For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.
Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.
Licence & Insurance Requirements
Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.
Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.
Standards
For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
USA
subscribers 
