Short Description

A range of slimline battery operated stairlifts for straight and curved stairs. The straight stairlift is available with a standard seat, a sit & stand model or as a stand up model with a perching seat. The curved stairlift is for indoor seated use only. It has a rack & pinion drive and the track is stair mounted. Features an onboard diagnostic control panel. Straight models are available for both indoor and outdoor use.

Options

Indoor models:
Hinged Rail at bottom of stairs. Where the lower track may be an obstacle, that section is hinged so can fold out of the way when stairlift is not in use

The curved stairlift features parking bend options that allow the stairlift to be parked conveniently off the staircase both at the top and bottom of the stairs

Models

Sit Down Model
For those whose who need a seating position, this model has a full swivel seat allowing the user to turn a full 90 degrees when the chair stops at the top of the stairway. This means the user can exit the lift with both feet on the level landing. When not in use the chair folds allowing free access for pedestrian traffic.

Sit & Stand Model
This allows the user(s) of the stair lift to choose to ascend / descend the stairs in either the usual seated position or to stand on the footrest, whilst holding onto a special folding steady / security bar for stability. It is suitable for those who may have problems with bending their knees, or where multiple users with different requirements will be using the stair lift.

Stand Up Model ( Standing / Perch Seat Model)
Suitable where the stairs are narrow, or because the users legs will not bend enough to allow them to sit down on the stairlift. It is operated by the remote control system, or alternatively with the wanderlead control which can be positioned for maximum comfort and ease of operation.

Curved Rail Model
For stairs with a bend or a change in direction, the Acorn 80 curved stairlift accommodates most stairs and can be used over two or more levels in multi-level homes. Seated models only are available.

More Details

Acorn Superglide Straight Stairlifts

Method of lift operation: Constant pressure paddle switch on end of both armrests as well as two push button remote controls. Smooth start / stop action. Key switch to isolate.
Track: Anodised aluminium extrusion with steel toothed drive rack. Outdoor rack rust-proofed.
Track mounting: Direct onto stair tread.
Armrests: lift up, unpadded moulded armrests
Footrest: slip resistant covering, lift up
Seat : swivel, lift up, fabric padded on indoor model, vinyl padded on outdoor model. A retractable belt is standard on the seated model. The swivel seat allows the user the ability to turn a full 90 degrees when the chair stops at the top of the stairway. This is operated by a lever on the uppermost side of the seat. This means the passenger can exit the lift with both feet on the level landing.
Safety Features: Five obstacle sensors - the lift stops when a sensor detects an obstacle.
Electronic and mechanical braking systems: The stair lift is fitted as standard with these safety systems to eliminate any possibility of an uncontrolled descent of the stair lift.
Power: Safe 24 volt rechargeable batteries. The batteries are maintenance free and charged by a safe 15 volts AC, which is stepped down from the domestic mains supply by the transformer.
Onboard diagnostic control panel allows easy identification of problems with the stairlift. An LED number display at the side of the unit indicates normal operation, or a fault exists. Allows fast diagnosis and remedy of most potential faults.
Soft start/stop: Means no jolts of bumps during a smooth journey up or down stairs.
Outdoor models: Supplied with a waterproof cover for the motor and drive parts.

Acorn 80 Curved Stairlift

Method Of Lift Operation: Directional rocker switch on the end of one or other chair arm. Smooth Stop/ Start. On/Off switch and optional keyswitch isolator. Separate levelling motor electronically monitors travel and ensure the seat is kept level on gradient changes.
Track: Powder coated aluminium extrusion with rack and pinion drive . Mounted direct to stair treads
Armrests: Fold-up moulded armrests with padded top surface
Footrest: Slip resistant covering , fold-up.
Seat: Padded fold up seat. Swivel. Retractable seatbelt as standard. Swivel seat feature allows the user to turn the seat to face the landing at the top of the stairs, with both feet on the landing.
Safety: Obstacle sensors stop the lift if it meets an obstruction. Electronic and mechanical overspeed brakes prevent uncontrolled descent.
On-board diagnostic system monitors operation of the lift and allows easy identification of the lift status for operation and fault diagnosis.
Power: 24v DC Power from maintenance free NiCd batteries. Automatic onboard charging system ensures batteries are ready for the next journey.
Specification: Each Acorn 80 is custom built to suit each staircase, with options for accommodating both flat and winding turns, and travelling on the inside or outside of the bends. Detail specification must be confirmed at a home assessment visit by a trained stairlift surveyor

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee is charged for a lift installed in a public place. There is no fee for a stairlift installed in a private residence for use by a person with a disability. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

Installation takes little over an hour for straight stairlifts, and around half a day for the curved stairlifts

It is recommended that the lift be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee. Verified by Workcover Registration Number LEM6-92618/06 for the Superglide Straight Stairlift and LEM6-105920/08 for the Acorn 80 Curved Stairlift.

As regulated by the NSW Home Building Act, your stairlift installer must be the holder of a current NSW Mechanical Services Licence. Acorn Stairlifts Pty Ltd Licence Number 199161C

Request further details from the supplier or contact WorkCover Plant Registration Unit to verify plant registration, and the NSW office of fair trading for a licence check

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

It is an offence under the Home Building Act for a company to advertise, offer for sale or install a stairlift without the appropriate licence.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Acorn Stairlifts (UK)