Short Description

This electrically operated single bed for adults features a side to side turning function to enable weight transfer. An integrated safety cradle consists of three curved supporting straps which cradle the mattress and user. Trendelenburg 1(forward tilt), trendelenburg 2 (reverse tilt), height adjustment, knee break, leg raise and backrest angle adjustment are included. The bed is placed on a locking four castor base.

Options

IV pole.
Self help pole

Models

Deluxe model - with trendelenburg positioning and CPR function

More Details

Frame
Square tubular framework.

Headboard / Footboard
*Both the headboard and footboard are standardly included.
*They clamp onto the bed frame and are both removable.
*The handset control can be hooked over the headboard.

Adjustment and Controls
*Two handsets are provided. One handset operates the standard bed adjustments which includes backrest raise and lower, knee break, leg raise, height adjustment and trendelenburg. This control features a white face with push buttons with picture symbols for each function. The other handset operates the safety cradle and the turning function. It has a black face with numbered touch buttons.
*The turning function will not operate until the safety cradle is raised into position.
*Programmable turning functions are available.
*The first setting can provide one turning motion every six minutes. Ten turning motions complete a full turning cycle. This function completes a full turn cycle in two hours.
*The second setting provides a slower cycle providing one turning motion every twelve minutes. This function completes a full turn cycle in two hours.
*The side tilt will go up to a maximum of 30 degrees.

Mattress
*This bed can be provided with an Ultimate MacMed foam mattress. It consists of three layers of foam and features a vapour permeable cover.
*The bed is not designed to be used in combination with air filled alternating mattresses.

Castors
The four castors all feature a foot pedal brake. Each end of the lever is colour coded red or green to ascertain when the castor is locked or unlocked.

Bed Rails
*A fold down rail is featured on each side three quarters the length of the bed.
*A push button mechanism releases the rail to fold. When lifted up it automatically locks back into place.
The handset controls can be hooked over the safety rail.

Safety Feature
*CPR backrest release.

Motor
*Linak motors with 24 volt operation are used.
*Battery backup is featured.

Safety and Maintenance
Refer to supplier / manufacturer manual and instructions for all safety and maintenance details.

Benefits
*The cradle design increases the surface area of contact between the body and the mattress assisting in pressure reduction. The cradle provides stability when the person is turned to the side.
*Allows pressure relief with each rotational tilt of the bed
*Reduces manual handling from carer
*Assists with repositioning user for skin inspection, cleaning.
*Reduces complications associated with immobility
*Utilises static mattress surfaces that are easily cleaned and maintained.

Note:
- legrest raise (bed frame bends at knee area and the foot end of the bed remains elevated)
- Knee break (bed frame bends at knee area and the foot end of bed remains low)
- Trendelenburg Tilt allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Minwa Pty Ltd (Vic) Australia