Short Description

A rigid frame battery powered wheelchair for children. It features interchangeable front or rear wheel drive with a floating castor system and independent drive wheel suspension. Suitable for indoor and outdoor use. Manually operated tilt in space and an angle adjustable backrest are standard features. A wide range of options is available including Power Seat Raising.

Options

*Powered tilt in space
*Adjustable backrest recline
*Seat rise in space with a cantilever (or seat raising) action.
*The wheelchair can be customised with seating size and supports and frame dimensions

Models

*Standard base model has manually operated tilt in space
*Power seat raise model allows the seat to vary in height.

Additional Dimensions

Length 810mm
Height 840 - 990mm
Seat Front Height 500 - 740mm
Backrest Angle 80 - 100 degrees
Seat Angle 0 - 30 degrees

More Details

Frame
*Rigid powder coated steel frame.
*A range of colours are available.
*Drive wheels have independent suspension.
*Floating castors on a pivoting frame.
*This can be changed between front and rear wheel drive on the same wheelchair base without using tools.
*The load capacity is affected if tilt in space seating is used.

Seat
*Foam padded seat as standard with vinyl or sailcloth upholstery. A range of colours and patterns are available.
*Standard seat size can be provided with dimensions made to specifications. It is adjustable in seat width and seat depth.
*Solid seat insert is optional.
*All seating can be customised.

Backrest
*Tension adjustable slung backrest using vinyl or sailcloth is standard.
*Backrest is angle adjustable as standard.
*Backrest can be customised with extra supports added.

Headrest
Headrest can be custom made.

Armrests
*Full length, height adjustable, padded armrests.
*Armrests are adjustable in height and depth.
*Armrests are removable.
*Able to be customised in shape and dimensions.

Legrest
* Swing away, removable legrests are standard and adjustable in length.
*Fixed option is available.
*Elevating legrests and stump supports are available.

Footplates
*Split, lift up footplates are standard.
*One piece, two piece, footboard and platform are optional and can be customised.
*Extension tubes, heel loops and toe straps are available.

Controls
*Dynamic DX proportional and non proportional controls can be used.
*Commando Plus controller is standard option.
*These controls can control seat raise, tilt in space and recline.
*Options include Joystick, chin control, sip and puff, head, tray and attendant controls.
*Environmental controls can be added.

Adjustment
.Manually operated tilt in space is attendant operated using a foot pedal at the rear of the seat.

Batteries
*Two 38amp batteries are used.
*The batteries are mounted centrally between the four wheels and castors.

Motors
Two direct drive motors.

Transport
*Two tie down points are fit to the drive wheel section of the frame, and a centre tie down point is on the castor end of the frame.
*The backrest and armrests are removable for transport.

*This wheelchair can be changed between front wheel drive and rear wheel drive without using tools.
*The cantilever seat may be of benefit when higher surfaces are needing to be reached such as benches at school.
*The wheelchair can still operate when the seat is raised, but it will travel at a slower speed.
*Tilt in space can be used when the seat is raised.

*May be suitable for a small adult

Maintenance

Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings

Standards

Specific Australian Standards or other Standards may be applicable for materials, manufacturing processes or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standards.

Place Of Manufacture

Vic Australia