Short Description

A mains powered, platform stairlift that transports a person up and down a curved or straight stairway whilst the person is positioned in a wheelchair on a platform. Folds away when not in use and a seat is included. Indoor and outdoor applications. Two models with options are available.

Options

. retractable safety arms
. motorised folding platform
. wider platform dimension 1250x800 mm available
. waterproof PVC cover for outdoor model
. sound signal for movement
. blinking light signal
. intermediate stops
. folding seat

Models

V64 - installed on straight staircases with a constant gradient

V65 - installed on curved staircases with variable (turns and changes) gradients - platform 830mm x 700mm
Optional larger platform size - 1050mm x 770mm

More Details

PLATFORM
The platform is constructed from stainless steel and has a slip resistant surface.

RAIL
A dual rail system made of elliptical tube. Suitable for gradient of 0 to 45 degrees (up to 50 degrees with load capacity reduced to 200kg).

TRACK MOUNTINGS
The stair lift can be mounted directly onto an existing wall (if the wall is sufficient to withstand the loads imposed by the lift) or step mounted on the stair treads using support posts.

SAFETY
The stairway lift has automatic safety arms, automatic fold up safety ramps (closed at 45 degree inclination during wheelchair travel) and emergency stop button on the controls. In the case of power failure there is a manual crank handle. It also has a speed limiter, electric safety limit switches and a removable key.

The lift is fitted with safety edges to minimise the risk of injury due to trapping or squashing. Optional acoustic movement signal.

CONTROLS
Operated by constant pressure controls, as standard. On board and on the attendant remote control, there are the up/down push buttons and an on/off key switch plus control for opening / folding of the platform. Optional call and send floor controls with up/down push-buttons. Optional key switch at landings.

POWER SOURCE
24V dc power supply given by means of security transformer connected with 220V single, phase line.

SPEED
5m/min with soft start and slower speed in turns

MOTOR
0.7 Kw mounted on board, fitted with an electro mechanical brake with manual operation facility in the event of power failure

DISMANTLING/ FOLDING
Folding platform, power folding platform available.

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is recommended that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Complies with AS 1735 part 7

Place Of Manufacture

Italy