Short Description
A water powered pool lift that is fixed to the ground. Seat height is individually adjustable. The user triggers the operating lever and the seat turns through 90 degrees while lowering into the water. It can also raise the user back to the edge of the pool. The lift can be dismantled.
Models
Only one model is available
| Specification |
Standard |
| Boom Rotation |
Unknown |
| Load Capacity (supplier stated) |
150 kg |
| Seat Depth |
Unknown |
| Seat Width |
Unknown |
| Spreader Bar Height |
Unknown |
Additional Dimensions
Seat Height NSW................................... 1067 mm
Speed (mm/sec).................................... 33.3 mm/s
More Details
Material
Stainless steel. Solid contoured plastic seat with backrest and tubular steel armrests. Drainage holes in seat
Action
Vertical, seat pivots automatically through 90 degrees around the mast. Seat height can be individually set to stop at a required point.
Control
Operating levers are located on the mast both at entrance level and at water level. Can be user or attendant operated.
Water Pressure
Requires min 3.8 bar to operate
Method of Operation
The user activates a lever to raise and lower the chair
Armrests
Tubular steel armrests
Factors To Consider
A minimum pool depth of 1067mm is required.
Installation
Two fixing methods
1. Base console is countersunk at the site using glue or concrete (permanent fixation)
2. Base console is bolted to the ground
No underwater assembly is necessary
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Place Of Manufacture
Germany
subscribers 
