Short Description

The Airtech Seating System is a cushion consisting of an air filled seat pad with a segmented surface. It features a vapour permeable cover of polyurethane coated knitted fabric which has an antimicrobial agent. The cushion has an integrated pump and a pre set valve pressure to 40mmHg. Two colour choices available. The supplier states that this cushion is suitable for people at low to medium risk of developing pressure areas.

Method Of Use

1. With the palm of the hand press repeatedly on the in built pump. The pump is located at the front centre of the cushion.
2. Once the cushion is fully inflated place the cushion on a firm surface. The maximum pre-set pressure is 40mmHg.
3. Place the individual on the cushion in his / her normal sitting position.
4. Press the button on the release valve. This valve is located to the side of the cushion. Continue to press the valve until the optimum pressure is reached.

Models

Model ACH01 - cushion with standard cover.
Model ACH11 - cushion with black cover.

More Details

STRUCTURE
The polyurethane seat pad has a cell structure (Axis) which creates a baffle effect to allow air flow within the cushion. It is low profile.

COVER
Polyurethane coated knitted fabric. Vapor permeable (breathable). Removable

FEATURES
. To fit seat widths of 400 - 450mm
. Low weight

APPLICATION
. The supplier states that the Airtech cushion is suitable for people at low to medium risk of developing pressure areas.
. Suitable for wheelchair and armchair use

ADJUSTMENT
See Method of Use

Factors To Consider

All cushions must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion. Where bottoming out occurs even with correct use (eg correct inflation level) , a different product may need to be considered."

Ensure that the item is not accidentally placed upside down or back to front. Also ensure the item is correctly inflated at all times.

Maintenance

Refer to supplier / manufacturer manual for all safety and maintenance details.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

Place Of Manufacture

UK