Tub Way is an adaptive tub conversion. The supplier will custom cut an opening in the tub wall to create easier step - through access into the tub. It converts the tub into an accessible shower. This can be done on any existing fiberglass, steel or cast iron bathtub.
* The Tub-Way creates a 460mm wide opening in the tub. The opening, however, can be made as wide or narrow as needed for the situation.
* The threshold is approx 125mm above the bathroom floor level
* The existing shower curtain will prevent water splashing out.
* Custom fitted components are used. These will exactly match any tub contour and thickness and will retain its factory made appearance. The finish is seamless.
* The conversion takes less than a day
* The Tub-Way is completely reversible and can be reversed in a day. A tub that been reversed retains its original strength and appearance, can be sat on, and can be filled to the top once more.
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
| Supplier | Location | Contact | Website |
|---|---|---|---|
| Pro Bath & Tiles Reglazing Australia | Randwick, NSW | Sales: 0404 999 758 Contact Person: Jaakov Cohen |
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.
