Short Description

A compact mobile, battery operated hoist which may be used to lift and transfer a person to and from a bed, chair or the floor. The hoist is compatible with a standard spreader bar or tilting / pivot frame. Leg opening can be manually or electrically operated. Suitable for domestic or healthcare facility use.

Options

* Tilting / Pivot Frame
* A range of sling sizes and types
* 75 mm castors

Models

* Sonata 150 Compact Mobile Patient Lifting Hoist with a load capacity of 150kg
* Alto Lift 200 - a medium sized heavy duty patient lifting hoist with a load capacity of 200kg

More Details

Frame
This steel framed, epoxy coated hoist has an upright mast. A rectangular shaped push handle is mounted at the top of the mast.

Boom
An angled boom with a padded end and either a standard spreader bar with two attachment points at each end for the slings or a tilting pivot frame (uses pivot slings with keyhole fittings) .
Controls
Hand held controls are attached to an extendable cord.

Charger
In built charger with manual leg opening / closing
Separate charger with powered leg opening / closing
Base
The 'U' shaped base has either manually operated leg opening using a lever (three positions) or electrically operated leg opening using the hand held control.

Dismantling
The hoist can be dismantled to two parts.

Slings
See Options

Factors To Consider

It is recommended that prior to using this product, training in manual handling and the correct use of assistive devices should be undertaken.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Allegro Sonata has been tested and complies with the relevant Australian Standard.

Place Of Manufacture

NSW, Australia