Short Description
An electrically operated lift with a maximum travel of 12 metres and five stops. The drive system includes a double V belt transmission to a rotating nut assembly. It includes a free standing enclosure with a choice of finishes. No pit is required. The load capacity is 400 kg or 630kg. It accommodates 5 persons or one wheelchair and two persons. Suitable for indoor and outdoor use.
Options
* Powered door closing
* Audible announcement of floor
Models
One model is available
More Details
Drive System
* Double V belt transmission to a rotating nut assembly
* Driving nut and safety nut working on a fixed hanging screw
* Soft start and stop
Shaft
A solid and self supporting shaft made of prefabricated steel panels covering three sides of lift
Finish
Colour of choice or a glazed or stainless steel finish is available
Controls
* The control system is incorporated within the lift shaft
Platform Controls
* Tactile and braille hold-to-run floor designated buttons, emergency stop and alarm buttons on platform console
* Controls are set at a suitable height for a wheelchair user
Landing controls
* Tactile and braille call buttons at each landing and key switch
Doors
* Two fully glazed wing doors
* Supplied complete with concealed door closers
* The doors can be left or right hinged and can be installed on three sides of the shaft
Power Source
* Mains electricity
* Power requirements 415v or 240v
Motor
2.2kw
Safety Features
* All extreme edges of the platform have movable safety edges which immediately stop the lift when touched
* Rigid hand rail
* Speed is limited
* The control system is hold to run type
* Equipped with an emergency stop and alarm device
* Emergency telephone
* The floor is covered with a rubber mat
Installation
No pit is required. This lift can be installed directly to the floor
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is compulsory that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Standards
February 2010
The supplier's website states that this lift complies with AS1735:15
Place Of Manufacture
Sweden
subscribers 
