More Details

Application
The SPLASH hoist is suitable for use with a below ground pool. Other models cater for above ground pools

Structure
The hoist consists of a mast, boom and portable deck mounted base

Materials
The hoist is constructed of corrosion resistant materials which are powder coated aluminium and stainless steel

Seat
*The boom has a plastic seat attached
*The seat has drainage holes in the seat base and backrest, and swing away arms to allow a side transfer

Position
* The hoist can be positioned anywhere around the pool where there is an anchor sleeve and then put away when not in use
* It does not require access to water or electricity supply except when recharging the battery

Transporting
There is a caddie which is used to transport the hoist when moving to another location or storage.

Operation
* The hoist raises and lowers via battery operation
* A hand held control is used to lift and lower the boom
* The hoist is rotated through 359 degrees, by pushing on the button on the water proof hand control unit attached to a cord
* The hand control is submersible so can be left connected while the user is swimming
* The control unit can be attendant or user operated

Battery
* There is an inbuilt 24 volt battery which is re-chargeable
* The battery is located on the mast of the SPLASH and is removed to a wall mounted charger when required
* The green light on the battery indicates a connection to a power source
* The orange light on the battery indicates the battery is charging
* When the battery is fully charged the orange light goes off

Place Of Manufacture

United States of America

Price Guide

$10,990.00 Standard price
Plus delivery

Considerations

It is recommended that prior to using this product, training in manual handling and the correct use of this product should be undertaken

Models

Splash Spa Designed for use with spas up to 132cm above the deck

Splash Hi-Lo For facilities with above and below ground pools and spas. the single lift can be used in a variety of locations

Splash HD Designed to accommodate users up to 170 kilograms

Splash Mariner Sling lift used to transfer users from floating dock onto to boat

Splash Extended Reach For pools with unusual gutter configurations requiring a longer reach to the water line

Options

* Seat pad
* Spineboard attachment
* All weather cover
* Stability vest

Additional Dimensions

Height............................. 3270mm
Base diameter...................... 710mm
Overall length extended.............3310mm
Overall length storage position.....1380mm
Backrest width .....................510mm

Installation

* The SPLASH requires an anchor sleeve near the pool edge
* The base slides into an anchor sleeve which is installed in the pool deck.
* The anchor sleeve should be totally encapsulated in concrete
* The optimal mounting distance from the edge of the pool for the anchor sleeve is 460mm
* The hole should be 180mm deep and 130mm wide

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards

TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.