More Details
Frame
* The Quickie Q7 has a rigid, lightweight aluminium frame
* ShapeLoc Technology has been used to convert the lightweight "7000 Series" aluminium frame into a stronger, more rigid T6 aluminium by heat treating the aluminium
* Oval tubing is used in the frame, axle plate and caster housing to prevent bending and rotation. Its vertical strength decreases frame flex and increases overall rigidity
* It comes in16 standard frame colours (including glow in the dark), four custom frame colours (desert camouflage, mossy oak camouflage, stars and stripes and zebra) and six anodized colours
* Rear anti tip bars are available
Seat
* The seat is slung style, nylon upholstery that is bolted to the frame
* It is available in nine seat widths and depths
* An ultra seat sling that uses hook and loop to attach to the frame is also available in most size options
* A depth adjustable backrest is optional to increase seat depth by up to 50mm
* The seat height can be adjusted by 10mm by the user by inserting or removing a spacer
* Seat fall (squeeze frame) is possible
Backrest
* Backrest options include a slung style nylon upholstery, tension adjustable ballistic nylon (a thick, tough, synthetic nylon fabric) or a tension adjustable 3DX vented backrest
* An aluminium, height adjustable backrest is standard in four different height ranges
* An ultra lightweight, aluminium, fixed backrest is optional with 12 height options
* Three seat to back angles are possible including 75, 80 and 85 degrees. Optional plugs can be put in the backrest adjustment holes to stop user from clicking backrest into wrong position
* The backrest can be folding or non folding and is angle adjustable
* Push handles are standard. Height adjustable, telescoping push handles and fold down push handles are optional
* A narrow backrest inset (backcanes set 25mm narrower then seat width) is also optional
Armrests
* Armrests are optional. Armrest options include padded, swing away armrests with angle adjustable hardware and height adjustable armrests. Height adjustable armrests are available in desk length or full length. A gel swing away arm pad is optional.
* Side guards are available, but not with height adjustable armrests and not recommended with swing away armrests due to interference. Plastic side guards are standard. Aluminium, aluminium with fender and carbon fiber side guards are optional. Side guards are available in black or a range of colours to match the frame.
Legrest
* Standard or classic fixed front ends are available
* The standard front end frame bends down towards footplate where the seat sling ends
* The classic front end bends down 40mm in front of seat sling
* Lower leg length adjustment mechanics are hidden within the frame
Footplates
* An aluminium tubular footplate is standard
* A snap on cover for footplate is an option
* A platform footrest or Ultra Lite platform footrest is optional. 50, 100 or 150mm platform spacers are available for the platform footrest
* A leg strap is standard
* Gel hanger covers, neoprene impact guards, wear pad and position plates are optional
Wheels
* Standard tyres include full polyurethane, high pressure Clincher, Kik Mako black (solid tyre), pneumatic or Schwalbe Marathon Plus Evolution tyres.
* Optional tyres include knobby V-TRAK by Kenda, Mountain, pneumatic with airless insert or Schwalbe Speed Run tyres
* 510mm (20"), 560mm (22") or 610mm (24") Mag wheels are standard
* 510mm (20"), 560mm (22"), 610mm (24"), 635mm (25") or 660mm (26") Lite spoke wheels are also available
* Other options include: 510mm (20"), 610mm (24") or 635mm (25") ultra lightweight spoke wheels; 560mm (22"), 610mm (24"), 635mm (25") or 660mm (26") Spinergy SPOX black spoke wheels or Spinergy LX black spoke wheels and 610mm (24") mountain wheels
* Quick release wheels are standard
* Quad quick release wheels are optional
* Aluminium anodized push rims are standard
* Push rim options include: plastic coated, natural fit (standard or super grip) or Spinergy flex rim.
* Multiaxle positions are available. The wheel axle can be positioned from 32mm in front of back post to 104mm in front of back post, increasing in 12.5mm (0.5") increments
*The camber of the wheels can be set at 0, 3 or 6 degrees. 6 degree camber is not available with Mag wheels
Castors
A large range of castors are available as standard. These include: 75mm (3") diameter micro castor, 100mm (4") low profile polyurethane, 100mm or 125mm (5") micro lighted, 100mm,125mm or 150mm (6") aluminium poly (25mm wide), 100mm, 125mm or 150mm semi pneumatic (32mm wide), 100mm,125mm or 150mm aluminium soft roll (38mm wide) and 150mm pneumatic.
* A multiple position two arm castor fork is standard. Multiple position single arm fork is optional.
* Frog legs for a range of load capacities are optional
* Castor setting options for small castor wheels make it possible to place casters further away from the centre of gravity for increased manoeuvrability and stability
* The castor frame outrigger can be bent inwards to reduce the width of the chair if needed
Brakes
* Brake options include high mount push on, high mount pull on, ergo scissor or compact brakes. Not all brakes are available in all seat depths, wheel sizes or centre of gravity.
* 150mm brake extension handles are an option on the push on or pull on brakes
* A low resistance side lever brake (push on) is available when there is no camber on wheels. The supplier states it may be useful for users with poor hand function.
subscribers 
