More Details
. The rails are made of a white plastic with no sharp edges.
. The rubber suction discs are located on each end of the rail. The suction disc diameter is 120mm on all models.
. The rails may be positioned on tiles and smooth walls. The tiles must be at least 130mm by 130mm in size.
. When the rail is in the desired position a vacuum seal is created under each disc by pushing down a plastic lever on each disc.
. Horizontal, vertical or various oblique positions are possible with the telescopic rail extended to whole tiles.
. A pivoting telescopic rail is available to allow rails to be mounted in difficult corners or within a bath.
Factors To Consider
Caution
* These rails use suction to maintain their position to the wall
* They are not designed to support full body weight and should be used as a temporary measure
* Check the condition of the wall or tub surface before positioning the rail
* High climatic temperature (above 30 degrees) will reduce the tensile force
* Keep the suction cups clean, dry and free of oils or grease
* Use underwater reduces adhesive power
Important Considerations
Do not:
* use on wall board, wood, painted or papered surfaces
* place over grout lines
* place in a position of direct sunlight
* use sharp instruments that may damage the suction discs
