Short Description
An electrically operated wall mounted, adjustable height shower table with a steel frame. The body support tray has drainage holes. It comes with a drip tray, fold down side rail and an adjustable angle backrest as standard. It is operated with a hand held control. Available in one size only.
Models
* RV7753190 Amber High/low shower stretcher with drip tray 190cm with adjustable back rest and a side rail
More Details
Wall Unit
* Wall frame is electrolytically galvanised steel
* Height adjustable profiles is untreated stainless steel tubing
* Stainless steel suspension point for stretcher
* (304L) powder coated (black)
* Stainless steel screws
* Plastic protective cap
* Lifting capacity: 135 kg
* Range: 600 mm
* Minimum speed 14 mm/s at maximum load
Drive Unit
* Power consumption 120W
* Drive operates at low tension (24V DC)
Benefits
* Height adjustable wall unit can be used universally
* Large range 60 cm
* Lowest reclining position approx. 400 to 500mm above the floor
* Fast lift speed
* Anti-finger entrapment
* Modern design
* Low noise emission\
* Easy to clean flat surfaces
* No sharp edges or protruding parts
? Stretcher can be easily lowered into vertical position
Installation
Bathroom Requirements
* 230V power supply
* Bipolar pull switch
* Differential switch 30mA
* Universal socket (min. IP55) installation height max.7.5cm
* No obstacles on wall
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation
Place Of Manufacture
Reval Continuing Care (Wales) United Kingdom
subscribers 
