Short Description
The Effect 8200 is an alternating air mattress replacement system for pressure relief. It is available in single bed size only and has an air pump which operates with mains power. A low air loss mattress option is available. The supplier recommends the Effect 8200 system for people at high risk of having a pressure injury.
More Details
Structure
* Mattress has 20 air cells which alternate and can inflate to 20cm in height.
* Cells and base are made from Nylon and PVC.
* Replacement cell available in the event of damage to an air cell
Cover
* Waterproof and vapour permeable cover is made from Nylon and PVC.
* Cover has a zipper which allows it to be removed for washing
Attachment
* Mattress attaches to the bed frame through adjustable buckle straps.
Pump / Controls
* Pump unit is portable and has a fixed hook for attaching to the bed frame on the base.
* Pressure is set manually by calculating appropriate pressure.
* Pressure range available between 20mm Hg -70mm Hg
* Three modes available which include a static, alarm reset and auto firm mode
* Pump requires mains power.
* Cycle time can be set in intervals of either 10, 15, 20 or 25 minutes
Safety Features
* CPR quick deflate tab for emergencies.
* Air filter on base of pump
Customised Features
* Low air loss mattress available as an option.
Factors To Consider
All pressure reduction products must be monitored to prevent 'bottoming out'. This occurs when the user's weight bears down so hard on the product material that it is flattened and the bony parts are pressed against the surface below the cushion or mattress. Where bottoming out occurs even with correct use (eg correct inflation levels), a different product may need to be considered.
It is advisable that a health professional be consulted when considering a suitable pressure care product.
Maintenance
* Mattress cover is washable but must not be tumble dried.
* Air Cells can be replaced if required.
* See Instruction manual for specific details on appropriate products that can be used for cleaning.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
Place Of Manufacture
Taiwan
subscribers 
