More Details

* The Bed to Stand Helping Hand has been load tested to 150 kg and is TGA approved
* The device is suitable for ensemble beds and beds with appropriate support under the mattress. It is not suitable for wired (electric) or water beds.
* It can be used either side of the bed. The smaller handle (bed pole section) can be installed on the left or right larger handle depending on which side of the bed is used. It connected to the larger handle using a spring loaded pin mechanism.
* The curved larger handles have a rubber grip.

Dimensions
Width Overall 620, 700, or 825 mm (three widths available)

Method Of Use

* When the user is lying on the bed, the smaller straight handle can be pulled into the upright position and locked into place. This is used as a lever for the user to pull themselves from a lying to a sitting position.
* Once in the sitting position, the smaller straight handle can be left upright or rotated downwards.
* The two larger curved handles (on each side of the user) can be pulled up and locked into place in order to support the user and help them into a standing position.
* When not in use, the handles can be rotated and slid into the down position out of the way and next to the mattress. They will not be visible when the bed is made.

Considerations

The Bed to Stand Helping Hand is not suitable for wired (electric) or water beds.

In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Place Of Manufacture

Australia

Price Guide

$400 plus delivery cost
Deliver nationwide

Models

Only one model available

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards

TGA
Many of the items on the ILC NSW website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

ARTG ID number for this product