Short Description
A padded, contoured saddle seat on five star castor base. It features seat height and tilt adjustment. The backrest option is height and angle adjustable. The upholstery is vinyl. Available in a choice of seat styles and nine gas lift heights. The seat depth is shortened for children.
Options
* Four standard gas stem heights
* Specialty range of gas stems including; solid, non swivel, extra low, medium non swivel (stabilus), foot operated (100mm,140mm (standard) or 200mm), small non swivel
* Cut down / reduced abduction seat (used on childrens chair)
* Drafting foot ring
* Foot operated height adjuster - under the five star base
* Telescopic Gas Lift Cover
Back
* Standard backrest -adjusts in height and angle
* Small backrest - adjusts in height and angle
* Trunk Support
Covers
* Sheepskin
* Cloth
Bases
* Stainless steel five star base
* Black five star base
* Carpeted ply board castor base (for children)
Castors - all are twin wheel except the Glides Castors
* Standard castors
* Soft wheel castors
* Locking castors
* Friction / braking castors - free rolling when weight is applied
* Reverse Friction castors - free rolling when weight is removed
* Pull Apart castors - hooded castors that can be dismantled for cleaning
* Glides castors - bell shaped castor with flat bottom
Models
* Bambach Saddle Seat - Standard (with / without Back)
* Bambach Saddle Seat - Narrow (with / without Back)
* Bambach Saddle Seat - Executive (with / without Back)
* Bambach Saddle Seat - Small (with / without Back)
Accessories
* Bambach Saddle Seat with Drafting Foot Ring
* Bambach Saddle Seat with Surgeon's Foot operated LIft
* Bambach Saddle Seat with Carpeted Plyboard Base
* Bambach Saddle Seat with Fully Adjustable Trunk Support
| Specification |
Child Seat |
CUTDOWN SEAT |
EXECUTIVE / DRAFTING SEAT |
STANDARD SEAT |
| Armrest Height (from seat) |
Unknown |
Unknown |
Unknown |
Unknown |
| Load Capacity (supplier stated) |
Unknown |
Unknown |
From 200 kg to 300 kg |
Unknown |
| Seat Depth |
380 mm |
390 mm |
400 mm |
390 mm |
| Seat Height |
From 440 mm to 515 mm |
From 450 mm to 580 mm |
From 615 mm to 870 mm |
From 560 mm to 730 mm |
| Seat Width |
From 260 mm to 330 mm |
From 109 mm to 360 mm |
From 230 mm to 400 mm |
From 230 mm to 330 mm |
Additional Dimensions
Gas stem
Load capacity tested to 200 kg (supplier stated)
Five star base
Diameter 600 mm
Load capacity 300 kg (supplier stated)
More Details
* Chair designed to place and maintain the body's centre of gravity above the pelvis (over the ischial tuberosities)
* The hips are flexed at 35 degrees to 40 degrees and supported in abduction. This allows the body to flex forward at the hips rather than back
* Front right lever control mechanism for gas height adjustment
* Rear right lever adjustment of back and seat tilt
* Hand operated ratchet mechanism to adjust back height
* High density padding upholstered in easy clean vinyl
* May be suitable for bariatric use (up to the specified load capacity)
* Gas Stem Height Suggestions for persons:
* Below 5'2" - use low gas stem
* Between 5'2" - 6' use standard gas stem
* Above 6' - use drafting gas stem
* Please note: These suggestions will change depending on profession and workstation
Place Of Manufacture
AF Bambach (NSW) Australia
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
www.ilcnsw.asn.au/home/assistive_technology/standards
subscribers 
