Short Description

Three models of trays with cut out sections, which fit most standard
wheelchairs with either full armrests and dining armchairs. Each tray is designed with an accessible cam lock buckle at the side so the user can remove it. One reversible model has a soft padded side and a firm side.

Method Of Use

To secure tray:
Chair arm straps:
. Place tray on arms of wheelchair with velcro side up.
. Wrap velcro around arms and insert end with hook material through d
ring (where fitted).
. Pull down on hook material against loop material to secure.
Around the back strap:
. Bring webbing from left side of tray around and behind chair.
. Insert webbing through open buckle and take up slack.
. Secure buckle by firmly pressing down on the tab.
. Buckle is released by pulling up on loose end of webbing.

More Details

Cut-out section: 360 mm width
220 mm depth
Econo tray: . Black plastic covered plyboard
. Velcro arm straps fasten with d rings
Softop tray: . Black plastic covered plyboard on one side and plastic covered foam on the reverse side.
Duratray: . Grey flexible plastic with a reinforcing wooden ridge
under the front of the tray.
Strap materials: 25 mm velcro with red tab to assist locating end.
25 mm webbing which fastens with plastic cam lock buckle.

. The tray needs to be fitted by an attendant.
. It attaches by a velcro strap around each armrest and a long strap which
fits around the back of the chair and buckles at the side.

Place Of Manufacture

SKIL-CARE (USA)