Short Description
A vertical wheelchair platform lift available in four models for indoor and outdoor applications. It is battery powered and has a cable hydraulic drive system. If this lift is to be used in a public building it must comply with the relevant Australian Standard. Contact the supplier for details.
Models
. S - Standard model is designed for a variety of hoistway applications.
. EN - Enclosed model is enclosed to the upper gate in plexiglass or steel.
. SE - Semi-Enclosed model is enclosed on the upper landing.
. EXT -Exterior model is designed with added features for exterior use.
Options
. 1.5 hour, UL Listed fire-rated doors
. Custom finishes in stainless, glass or bronze
. Domes for enclosure models
. (EXT) exterior weather resistant package
. Gates, doors and bridges
. Variety of platform lengths 1219 mm, 1371 mm and 1524 mm
. Ninety degree or side load platforms
. Automatic and fixed ramps
. Call / send controls
. Attendant operated package
. Portable units
. Custom colours in baked polyester finish
. Designed for commercial and residential use.
. Each model has a choice of 6 maximum lifting heights from 1220 mm to 4270 mm.
More Details
STANDARD P.A.L. FEATURES:
. Emergency battery powered lowering and raising
. Smooth and quiet 1:2 cable hydraulic drive system
. Aluminium car frame with baked polyester electrostatic paint finish
. Emergency manual lowering device
. Slack cable safety drive
. Skid-resistant flooring
. Automatic battery recharging system
. Detachable platform base and sling
. Emergency cab light
. Cab handrail
LIFT SPECIFICATIONS:
. Power 110 volt converted to 24 volt DC
. Drive Type 1:2 cable hydraulic
. Rated Load Capacity 341 kg
. Platform Dimensions (clear) 1372 mm L
. Emergency Backup - Battery operation and down direction device
. Control System Key controlled constant pressure
. Rated Speed .08 m/s (nominal)
Installation
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is compulsory that the lift be inspected annually by a competent person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit Tel: 02 9370 5221. If outside the Sydney metropolitan area, phone the WorkCover NSW Client Contact Centre on 13 10 50 or the nearest WorkCover Regional Office.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Place Of Manufacture
CONCORD (USA)
Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Australian Standard(s).