A scooter hoist and carrier for transporting a fully assembled scooter on the outside rear of the car.
NOTE: This is not a stock item. It is brought in from the USA to order.
. A scooter carrier which may be fitted to the rear of a car, or wagon
provided a class 3 hitch with a 50mm receiver tow bar is used.
. Suitable for 3 or 4 wheeled scooters weighing up to 90kg
. Powered by the vehicles battery. Operation is fully automatic. Has an on / off key.
. A special weight sensing device applies exactly the right amount of pressure to the hold the device to secure the scooter
. Automatic emergency safety latch prevents the platform from lowering.
. Is delivered fully equipped including a lighted license plate holder, reflectors and a centre brake light.
. Waterproof cover for use in inclement weather conditions.
. The user may be capable of operating the carrier / lift themselves
INSTALLATION SPECIFICATIONS:
. There are no particular specifications or standards required for
installation in Australia except for the following conditions:
. Must comply with USA regulations.
. No obstruction of number plate.
. No obstruction of indicator lights.
. No obstruction of any safety features
OPERATION:
. To lower the platform from the stored position, move the control lever to the down position.
. Drive the scooter onto the platform
. Move the control lever to the up position and the lift automatically raises and locks the scooter in place.
. The 'Hold-Title' arm automatically lowers over the base of the scooter.
. The Out-Sider II automatically tilts the scooter toward the vehicle for better handling and added ground clearance.
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
| Supplier | Location | Contact | Website |
|---|---|---|---|
| Tramanco Pty Ltd | Mt Tambourine, QLD | Sales: 07 3892 2311 Fax: 07 3892 1819 Contact Person: Chris Strohfeldt | |
| Western Truck Equipment Pty Ltd | Arndell Park, NSW | Sales: 02 9672 1973 Fax: 02 9672 1982 Contact Person: Vicki Drady/Darren Jennings |
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.
