Short Description
A folding shower seats with stainless steel frame and woodgrain
phenolic slats (melamine type plastic). Slats are 8 mm thick x 76 mm wide. Frame has self locking mechanism to hold seat in folded up position. Available in two models. The larger model complies with Australian Standards.
Models
. B817190 Folding Shower Seat - complies with Australian Standards
. B5191 Folding Shower Seat
More Details
. Can be mounted at 432 mm to 508 mm from top of seat to floor. AS 1428.1-2001 recommends 470 - 480 mm
Installation
. Installation requirements - must be secured appropriately to studs or into wall. Must withstand a force of 1100 N. Installation must comply with AS 1428.1.
Place Of Manufacture
USA
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Shower seats in public buildings:
must comply with AS 1428.1 - "Design for access and mobility - Part 1: General requirements for access - new building work".
A width of 960 -1100mm is required, and depth of 390 - 400mm to comply with AS1428.1.
The fastenings, materials and construction of the seat must be able to withstand a force of 1100 N to comply with AS1428.1.