subscribers
|
A round plastic button switch, on a plate. It is designed for settings of up to 10 minutes - but is factory set to approximately 2 minutes. It can be
adjusted by rotating the arm at the rear of the switch, until the desired delay is obtained.
A round plastic button switch, on a plate. It is designed for settings of up to 10 minutes - but is factory set to approximately 2 minutes. It can be
adjusted by rotating the arm at the rear of the switch, until the desired delay is obtained.
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
| Supplier | Location | Contact | Website |
|---|---|---|---|
| Clipsal Australia Pty Ltd | Bankstown, NSW | Sales: 02 9794 9200 Fax: 02 9796 2132 Toll Free: 1800 425 611 |
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.
