Short Description

A rear wheel drive powered wheelchair suitable for indoor and outdoor use. Features include an adjustable dynamic stabiliser with large anti tip wheels at the rear of the frame to offer increased stability. Seat height and depth are adjustable. Drive wheels, motors and batteries are encased within a quick release power pack that can be removed for transport or to apply a self propelling manual wheelchair conversion kit.

Options

.Manual wheelchair conversion kit
Backpack.
Seat pouch.
Pelvic positioning belts.
Wheelchair tray.
Leg strap.
Qtronix programmer pad.

Additional Dimensions

Overall Length 800 - 800 mm
Backrest Angle 86 - 102 degrees
Diameter wheel 350 mm
Diameter castor 220 - 280 mm

More Details

Features
A heavy duty performance package is available for an increased load capacity.

Frame: Suspension is incorporated within frame.
A large range of frame colours are available.

Seat:
Seat height and seat depth are adjustable.
Slung seat is standard.
50mm foam cushion is available.
A solid seat base that accommodates specialised cushions is available.

Backrest:
Backrest angle can be adjusted.
A medium height fixed backrest is standard.
Low and tall height backrests are available.
A folding backrest is available.
Specialised backrest inserts can be used.

Drive Wheels:
Pneumatic tyres are standard.
Solid inserts are available.
Two wheel thicknesses available.
Drive wheel position can be adjusted 70mm forwards or backwards.

Castors:
Two castor sizes are available.
Solid tyres are standard.
Pneumatic tyres are available.
Suspension castor forks are available to increase obstacle climbing ability and comfort.

Drive Motors:
Two high torque brushless geared drives.

Control:
Qtronix remote joystick is standard and features five programmable profiles.
Charging and programming port located on joystick control.
Joystick mount is height adjustable and can be located on right or left hand side or centrally.
A range of joystick handles are available.
Specialised control devices and mounts are available.
Attendant control is an option.

Footrests:
Available as either fixed or swing away hangers.
Elevating hangers are available.
One or two piece footplates are available.
Heel loops are available.
Angle adjustable footplates are available.

Armrests:
Padded lift up desk style armrests are standard.
Height adjustable armrests are available.
Full length armrests are available.

Batteries:
Two 36 amp dry cell batteries are standard.
Two 50 amp dry cell batteries are available.

Dismantling:
Power pack can be released using levers located at the rear of the unit.

Manual Wheelchair Conversion Kit:
Quick release wheels are standard.
Aluminium handrims are standard. Plastic coated handrims are available.
Handrim projections are available.

Safety and Maintenance:
Refer to the manufacturer or supplier manual for maintenance, safety details and warnings.

Application: may be suitable for bariatric use up to the specified load capacity

Licence & Insurance Requirements

Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.

Standards

For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s)

Place Of Manufacture

Sunrise Medical (USA)