Short Description

An entrance flooring system designed to remove dirt and moisture at the point of entry. The wiper strips are made from rubber with a nylon fibre surface. These are linked together with alternating aluminium scraper strips. The linkages are made from high tensile steel. Available in five component configurations. Indoor and outdoor options. Two heights.

Models

Tuftiguard configurations are available with aluminium, brass and PVC scraper bars

Options

Stainless steel wire linkages

More Details

Suitable for high traffic areas
Wiper strips are reversible
Durable, slip resistant, quick drying
Removable for easy clean
Designed to remove dirt and small stones
Supplied with aluminium L angle recess or surface mount ramp frames
Designed for a recess or well installation but can be surface mounted if required
Resists fungal and bacterial growth
Colour fast and UV tested
Heel and wheel proof

Materials: slip resistant synthetic nylon fibre tufts on recycled rubber strip, aluminium
Construction: 3 variations of mat construction
1 closed - no gaps in finished surface
2 semi open - 5mm gap in the rubber strip allows small stones and water to drop through matting
3 open - 10mm gap in the rubber strip allows small stones and water to drop through the matting
Symmetry of design enables the use of standard size modules which may be interchanged to maximise wear
Colours: wide choice of colours for wiperstrips and scraper bars

Installation

Requires professional installation
Can be surface mounted (ramped on edges) or inset (with L angle brackets)

Maintenance

Vacuum daily to remove dust and dirt. Periodically remove the mat from the matwell and clean with warm water and mild detergent. Rinse thoroughly afterwards. When replacing the Nuway mat, turn it over to equally wear as this will double the life of the mat. Remove all dirt and debris from the matwell and replace the Nuway mat when dry. For further cleaning information please refer to the manufacturer.

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Burgess Matting and Surfacing Limited (NZ)