Short Description

A range of hand held shower kits available in a range of different configurations, to suit a variety of applications. Designed to be installed into domestic or healthcare facility settings. The kits are available with hand held shower hose and wall mounted bracket ('C' hook style). One handset model has an on / off water flow control.

Options

. Models on a slide grab rail
. Commercial and pulsator handshower kits
. A handshower with an on/off lever handpiece (HS018-21CW) recommended for low pressure installations only.
. Models to fit a bath diverter spout.

Models

All models available in chrome / white or chrome, with 1500mm hose, unless specified.

HS 018 Kit 1 Commercial hand shower with strong ABS handpiece and 1500mm premium hose. Includes a solid brass wall outlet elbow bracket with tapered "C" hook to engate conical end nut of hose. The bracket features dual check with 9L / minflow regulation and sediment filter for component protection.

HS 018 Kit 2 - as for Kit 1 with additional ABS wall mount bracket. Suitable for seated users.

HS 018 Kit 11 - as for Kit 1 plus two ABS wall mount brackets.

HS 018 Kit 23 - as for Kit 1 plus robust on / off side lever. This enables the water to be temporarily turned off at the hand piece.
NOTE: Not to be used as a line end stop control
It is recommended that the water be always turned off at the taps after showering. Failure to do this can cause the hose to deteriorate and blow out fairly quickly.

More Details

The kits are available with a range of different combinations of hand held showers with or without grab rails / slider with 'C' hook attachment, or wall brackets. The basic components that make up the kits are as follows:

Hand Held Shower
The hand held shower is constructed from ABS plastic, with a cylindrical hand grip. The rose component is circular, at a slight angle, providing a firm spray. The diffuser is removable for cleaning. The end of the hand grip tapers. It fits into the 'C' hook bracket on the slide rail, or into a wall mounted bracket. The hand held shower needs to be plumbed in.

Wall brackets
ABS plastic wall mounted bracket, with a 'C' hook, to engage the conical end nut of a hose.

Premium Hose
Reinforced chrome or white hose, 1500mm or 2000mm in length, provided in all kits. The hose is constructed from plastic, with nylon cord reinforcing and a ridged chrome or smooth white finish.

Installation

Manufacturer recommends the grab rails should be installed by a qualified tradesperson.
Hand held shower hose needs to be installed by a licensed plumber.

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Con-Serv (Qld) Australia