Short Description

A rigid frame rear wheel drive powered chair with a compact design. It features Sport Trac suspension. Suitable for indoor and outdoor use. Seating systems are interchangeable and there is a range of seating options. These include tilt in space and reclining backrest. A range of other options and accessories is available.

Options

Lap belt, cup holder, dust cover, oxygen tank holder, cane / crutch holder, rear basket, walker holder, saddle bag, full light package.

Seating Options
Powered lift seat
Euro padded seat 480mm wide. Can be supplied with powered tilt in space seat to 30 degrees, and powered recline.
Euro Sling Seat: Nylon slung back with solid seat board and 5 cm cushion.
Deluxe high back padded seat.
Synergy seat with slung back and seat board, adjustable for growth and able to be fitted with most seating products.

Backrest options
Depends on seating system chosen. Recline, tilt in space, recline and tilt in space are possible with manual or powered operation.

Legrest options : 70 degree swing away; 80 & 85 degree heavy duty; elevating; powered elevating

Footplate options: High Mount foot board; Swing Away or Drop In Legrests with Angle adjustable foot plates

Castor Options: solid castors 150mm, 200mm, 230mm diameter.

Control Options: specialty controls for auxillary operations such as powered elevating legrests; powered tilt in space

Models

One model is available with several seating options.

Additional Dimensions

Weight 61 kg
Weight of Heaviest Part 41 kg
Length 900 mm
Speed (km/hr) 9 km/h
Range (km) 40 km

More Details

Frame
Standard: Rigid frame. Anti tippers with rollers. Three point seat mount design. Tubular frame design with minimal shroud. Sport Trac suspension has springs and dampeners to adjust the comfort of the ride.

Colours
Frame available in red, blue, or green

Seat
Standard: Euro padded seat, 430mm wide.
Options:
Euro padded seat 480mm wide. Can be supplied with powered tilt in space seat to 30 degrees, and powered recline.
Euro Sling Seat: Nylon slung back with solid seat board and 5 cm cushion.
Deluxe high back padded seat.
Synergy seat with slung back and seat board, adjustable for growth and able to be fitted with most seating products. Not able to be fitted with seat tilt.

Backrest
Standard: Upright contoured padded.
Options: depending on seating system chosen. Recline, tilt in space, recline and tilt in space are possible with manual or powered operation.

Legrests
Standard: swing away
Options: 70 degree swing away; 80 and 85 degree heavy duty; elevating; powered elevating

Fooplates
Standard: Two piece. Aluminium. Flip up
Option: High Mount foot board; Swing Away or Drop In Legrests with Angle adjustable foot plates

Controls
Standard: Dynamic DX
Option: specialty controls for auxillary operations such as powered elevating legrests; powered tilt in space

Batteries
Two 12 volt deep cycle 50 amp/hr. Easy rear access

Charger
8amp Off board

Castors
Standard: 230mm diameter pneumatic.
Options: solid castors 150mm, 200mm, 230mm diameter.

Brakes
Electronic, regenerative disc park brakes

Free Wheeling
Individual dual free wheel release levers on rear

Maintenance
All wheelchairs require regular maintenance. Refer to user manual for details.

Application
May be suitable for bariatric use up to the specified load capacity

Sport-Trac Suspension allows the spring loaded drive wheels to move in two directions, up for rolling over obstacles and down when encountering transitions. The active rear anti tip wheels work in opposition to the drive wheels to eliminate the possibility of the chair losing traction when encountering obstacles, creating a safer, more secure ride.
This unique suspension system helps to harness the motors' torque to make smoother transitions in speed during acceleration or deceleration.

Factors To Consider

The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.

There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with max. length 1250mm, max. width 750mm, max. turning circle1500mm, and max weight 200kg.

For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.

Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Licence & Insurance Requirements

Registration requirements
In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the Motor Accidents Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.

Standards

For some types of equipment, specific Australian or other Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Asia